Datasheet

ANALOG-TO-DIGITAL CONVERTER
Converter
-REF
+REF
+IN
-IN
PenTouch
Control
Logic
C3-C0
MAV
V
DD
GND
GND
TEMP1 TEMP2
R
IRQ
90kW50kW
AUX
GND
X+
X-
Y+
Y-
VDD/REF PENIRQ
TSC2007
SBAS405A – MARCH 2007 – REVISED MARCH 2009 ...................................................................................................................................................... www.ti.com
Figure 23 shows the analog inputs of the TSC2007. The analog inputs (X, Y, and Z touch panel coordinates, chip
temperature and auxiliary inputs) are provided via a multiplexer to the Successive Approximation Register (SAR)
A/D converter. The A/D architecture is based on capacitive redistribution architecture, which inherently includes a
sample-and-hold function.
Figure 23. Analog Input Section (Simplified Diagram)
A unique configuration of low on-resistance switches allows an unselected A/D converter input channel to
provide power and an accompanying pin to provide ground for driving the touch panel. By maintaining a
differential input to the converter and a differential reference input architecture, it is possible to negate errors
caused by the driver switch on-resistance.
16 Submit Documentation Feedback Copyright © 2007 – 2009, Texas Instruments Incorporated
Product Folder Link(s): TSC2007