Datasheet

5–4
5.7 Cable PHY-Layer-Interface Switching Characteristics Over Recommended
Operating Free-Air Temperature Range, C
L
= 45 pF
(Unless Otherwise Noted) (see Note 3)
PARAMETER MIN MAX UNIT
t
d5
Delay time, SCLK↑ to D0 – D7 valid (see Figure 6–9) 1 11 ns
t
d6
Delay time, SCLK↑ to D0 – D7 invalid (see Figure 6–9) 1 11 ns
t
d7
Delay time, SCLK↑ to D0 – D7 invalid (see Figure 6–9) 1 11 ns
t
d8
Delay time, SCLK↑ to CTL0 – CTL1 valid (see Figure 6–9) 1 11 ns
t
d9
Delay time, SCLK↑ to CTL0 – CTL1 invalid (see Figure 6–9) 1 11 ns
t
d10
Delay time, SCLK↑ to CTL0 – CTL1 invalid (see Figure 6–9) 1 11 ns
t
d11
Delay time, SCLK↑ to LREQ↓ (see Figure 6–11) 1 11 ns
NOTE 3: These parameters are not production tested.
5.8 Miscellaneous Timing Requirements Over Recommended Operating
Free-Air Temperature Range (see Figure 6–13 and Note 3)
PARAMETER MIN MAX UNIT
t
c3
Cycle time, CYCLEIN (see Figure 6–13) 124.99 125.01 µs
t
w3(H)
Pulse duration, CYCLEIN high (see Figure 6–13) 0.08 120 µs
t
w3(L)
Pulse duration, CYCLEIN low (see Figure 6–13) 4 µs
NOTE 3: These parameters are not production tested.
5.9 Miscellaneous Signal Switching Characteristics Over Recommended
Operating Free-Air Temperature Range (see Note 3)
PARAMETER MIN MAX UNIT
t
d12
Delay time, SCLK↑ to INT↓ (see Figure 6–12) 4 18 ns
t
d13
Delay time, SCLK↑ to INT↑ (see Figure 6–12) 4 18 ns
t
d14
Delay time, SCLK↑ to CYCLEOUT↑ (see Figure 6–14) 4 16 ns
t
d15
Delay time, SCLK↑ to CYCLEOUT↓ (see Figure 6–14) 4 16 ns
NOTE 3: These parameters are not production tested.