Datasheet
ABSOLUTE MINIMUM AND MAXIMUM RATINGS
(1) (2)
THERMAL IMPEDANCE RATINGS
TS5A9411
SCDS241A – MAY 2008 – REVISED JULY 2008 ...............................................................................................................................................................
www.ti.com
SUMMARY OF CHARACTERISTICS
(1)
2:1 Multiplexer/
Configuration Demultiplexer
(1 × SPDT)
Number of channels 1
ON-state resistance (r
ON
) 5.3 Ω
ON-state resistance match ( Δ r
ON
) 0.03 Ω
ON-state resistance flatness r
ON(flat)
) 2 Ω
Turn-on/turn-off time (t
ON/tOFF
) 9 ns/7 ns
Break-before-make time (t
BBM
) 1 ns
Charge injection (Q
C
) 12.5 pC
Bandwidth (BW) 100 MHz
OFF isolation (O
ISO
) – 84 dB at 1 MHz
Crosstalk (X
TALK
) – 85 dB at 1 MHz
Total harmonic distortion (THD) 0.03%
Leakage current (I
NO(OFF)
/I
NC(OFF)
) ± 3 nA
Power-supply current (I
+
) 0.01 µ A
Package options 6-pin DCK
(1) V
+
= 5 V, T
A
= 25 ° C
over operating free-air temperature range (unless otherwise noted)
MIN MAX UNIT
V
+
Supply voltage range
(3)
– 0.3 6 V
V
NO
V
NC
Analog voltage range
(3) (4) (5)
– 0.3 V
+
+ 0.3 V
V
COM
I
K
Analog port diode current V
NC
, V
NO
, V
COM
< 0 – 50 mA
I
NO
On-state switch current – 50 50
I
NC
V
NO
, V
NC
, V
COM
= 0 to V
+
mA
On-state peak switch current
(6)
– 200 200
I
COM
V
I
Digital input voltage range
(3) (4)
– 0.5 V
+
+ 0.3 V
I
IK
Digital input clamp current V
I
< 0 – 50 mA
I
+
Continuous current through V
+
100 mA
I
GND
Continuous current through GND – 100 mA
T
stg
Storage temperature range – 65 150 ° C
(1) Stresses beyond those listed under " absolute maximum ratings " may cause permanent damage to the device. These are stress ratings
only, and functional operation of the device at these or any other conditions beyond those indicated under " recommended operating
conditions " is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.
(2) The algebraic convention, whereby the most negative value is a minimum and the most positive value is a maximum
(3) All voltages are with respect to ground, unless otherwise specified.
(4) The input and output voltage ratings may be exceeded if the input and output clamp-current ratings are observed.
(5) This value is limited to 5.5 V maximum.
(6) Pulse at 1-ms duration < 10% duty cycle
UNIT
θ
JA
Package thermal impedance
(1)
DCK package 259 ° C/W
(1) The package thermal impedance is calculated in accordance with JESD 51-7.
2 Submit Documentation Feedback Copyright © 2008, Texas Instruments Incorporated
Product Folder Link(s): TS5A9411