Datasheet

ManualsBrandsTEXAS INSTRUMENTS ManualsInterface ICsInterface IC - analogue switches US 8

FEATURES APPLICATIONS

DESCRIPTION/ORDERING INFORMATION

TS5A3359

1- Ω SP3T ANALOG SWITCH

5-V/3.3-V SINGLE-CHANNEL 3:1 MULTIPLEXER/DEMULTIPLEXER

SCDS214C – OCTOBER 2005 – REVISED JANUARY 2008

www.ti.com

• Cell Phones

• Isolation in Power-Down Mode, V

= 0

• PDAs

• Specified Break-Before-Make Switching

• Portable Instrumentation

• Low ON-State Resistance (1 Ω )

• Audio and Video Signal Routing

• Control Inputs Are 5.5-V Tolerant

• Low-Voltage Data Acquisition Systems

• Low Charge Injection

• Communication Circuits

• Excellent ON-State Resistance Matching

• Modems

• Low Total Harmonic Distortion (THD)

• Hard Drives

• 1.65-V to 5.5-V Single-Supply Operation

• Computer Peripherals

• Latch-Up Performance Exceeds 100 mA Per

• Wireless Terminals and Peripherals

JESD 78, Class II

• ESD Performance Tested Per JESD 22

– 2000-V Human-Body Model

(A114-B, Class II)

– 1000-V Charged-Device Model (C101)

FUNCTION TABLE

COM TO NO,

IN2 IN1

NO TO COM

L L OFF

L H COM = NO0

H L COM = NO1

H H COM = NO2

The TS5A3359 is a single-pole triple-throw (SP3T) analog switch that is designed to operate from 1.65 V to

5.5 V. The device offers a low ON-state resistance and excellent ON-state resistance matching with the

break-before-make feature, to prevent signal distortion during the transferring of a signal from one channel to

another. The device has an excellent total harmonic distortion (THD) performance and consumes very low

power. These features make this device suitable for portable audio applications.

ORDERING INFORMATION

PACKAGE

(1) (2)

ORDERABLE PART NUMBER TOP-SIDE MARKING

(3)

NanoFree™ – WCSP (DSBGA)

0.23-mm Large Bump – YZP Tape and reel TS5A3359YZPR _ _ _J9_

– 40 ° C to 85 ° C

(Pb-free)

VSSOP – DCU Tape and reel TS5A3359DCUR JAL_

(1) Package drawings, thermal data, and symbolization are available at www.ti.com/packaging .

(2) For the most current package and ordering information, see the Package Option Addendum at the end of this document, or see the TI

website at www.ti.com .

(3) DCU: The actual top-side marking has one additional character that designates the assembly/test site.

YZP: The actual top-side marking has three preceding characters to denote year, month, and sequence code, and one following

character to designate the assembly/test site. Pin 1 identifier indicates solder-bump composition (1 = SnPb, • = Pb-free).

Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of

Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.

2 NanoFree is a trademark of Texas Instruments.

PRODUCTION DATA information is current as of publication date.

Products conform to specifications per the terms of the Texas

Instruments standard warranty. Production processing does not

necessarily include testing of all parameters.

Summary of content (28 pages)

PAGE 1
www.ti.com TS5A3359 1-Ω SP3T ANALOG SWITCH 5-V/3.3-V SINGLE-CHANNEL 3:1 MULTIPLEXER/DEMULTIPLEXER SCDS214C – OCTOBER 2005 – REVISED JANUARY 2008 FEATURES APPLICATIONS • • • • • • • • • • • • • • • • • • • 1 2 • Isolation in Power-Down Mode, V+ = 0 Specified Break-Before-Make Switching Low ON-State Resistance (1 Ω) Control Inputs Are 5.5-V Tolerant Low Charge Injection Excellent ON-State Resistance Matching Low Total Harmonic Distortion (THD) 1.65-V to 5.
PAGE 2
TS5A3359 1-Ω SP3T ANALOG SWITCH 5-V/3.3-V SINGLE-CHANNEL 3:1 MULTIPLEXER/DEMULTIPLEXER www.ti.com SCDS214C – OCTOBER 2005 – REVISED JANUARY 2008 Summary of Characteristics (1) Triple 3:1 Multiplexer/ Demultiplexer (1 × SP3T) Configuration Number of channels 1 1.1 Ω ON-state resistance (ron) ON-state resistance match (Δron) 0.1 Ω ON-state resistance flatness (ron(flat)) 0.
PAGE 3
TS5A3359 1-Ω SP3T ANALOG SWITCH 5-V/3.3-V SINGLE-CHANNEL 3:1 MULTIPLEXER/DEMULTIPLEXER www.ti.com SCDS214C – OCTOBER 2005 – REVISED JANUARY 2008 ELECTRICAL CHARACTERISTICS FOR 5-V SUPPLY (1) V+ = 4.5 V to 5.5 V, TA = –40°C to 85°C (unless otherwise noted) PARAMETER SYMBOL TEST CONDITIONS TA V+ MIN TYP MAX 0 V+ UNIT Analog Switch Analog signal range VCOM, VNO Peak ON resistance rpeak 0 ≤ (VNO) ≤ V+, ICOM = –100 mA, Switch ON, See Figure 19 25°C ON-state resistance ron VNO = 2.
PAGE 4
TS5A3359 1-Ω SP3T ANALOG SWITCH 5-V/3.3-V SINGLE-CHANNEL 3:1 MULTIPLEXER/DEMULTIPLEXER www.ti.com SCDS214C – OCTOBER 2005 – REVISED JANUARY 2008 ELECTRICAL CHARACTERISTICS FOR 5-V SUPPLY (continued) V+ = 4.5 V to 5.5 V, TA = –40°C to 85°C (unless otherwise noted) PARAMETER SYMBOL TEST CONDITIONS TA V+ MIN TYP MAX UNIT Dynamic Turn-on time tON VCOM = V+, RL = 50 Ω, CL = 35 pF, See Figure 23 25°C 5V 1 Full 4.5 V to 5.5 V 1 2.
PAGE 5
TS5A3359 1-Ω SP3T ANALOG SWITCH 5-V/3.3-V SINGLE-CHANNEL 3:1 MULTIPLEXER/DEMULTIPLEXER www.ti.com SCDS214C – OCTOBER 2005 – REVISED JANUARY 2008 ELECTRICAL CHARACTERISTICS FOR 3.3-V SUPPLY (1) V+ = 3 V to 3.
PAGE 6
TS5A3359 1-Ω SP3T ANALOG SWITCH 5-V/3.3-V SINGLE-CHANNEL 3:1 MULTIPLEXER/DEMULTIPLEXER www.ti.com SCDS214C – OCTOBER 2005 – REVISED JANUARY 2008 ELECTRICAL CHARACTERISTICS FOR 3.3-V SUPPLY (continued) V+ = 3 V to 3.6 V, TA = –40°C to 85°C (unless otherwise noted) PARAMETER SYMBOL TEST CONDITIONS TA V+ MIN TYP MAX 16 30.5 UNIT Dynamic Turn-on time tON VCOM = V+, RL = 50 Ω, CL = 35 pF, See Figure 23 25°C 3.3 V 1 Full 3 V to 3.
PAGE 7
TS5A3359 1-Ω SP3T ANALOG SWITCH 5-V/3.3-V SINGLE-CHANNEL 3:1 MULTIPLEXER/DEMULTIPLEXER www.ti.com SCDS214C – OCTOBER 2005 – REVISED JANUARY 2008 ELECTRICAL CHARACTERISTICS FOR 2.5-V SUPPLY (1) V+ = 2.3 V to 2.7 V, TA = –40°C to 85°C (unless otherwise noted) PARAMETER SYMBOL TEST CONDITIONS TA V+ MIN TYP MAX 0 V+ UNIT Analog Switch Analog signal range VCOM, VNO Peak ON resistance rpeak 0 ≤ (VNO) ≤ V+, ICOM = –8 mA, Switch ON, See Figure 19 25°C ON-state resistance ron VNO = 1.
PAGE 8
TS5A3359 1-Ω SP3T ANALOG SWITCH 5-V/3.3-V SINGLE-CHANNEL 3:1 MULTIPLEXER/DEMULTIPLEXER www.ti.com SCDS214C – OCTOBER 2005 – REVISED JANUARY 2008 ELECTRICAL CHARACTERISTICS FOR 2.5-V SUPPLY (continued) V+ = 2.3 V to 2.7 V, TA = –40°C to 85°C (unless otherwise noted) PARAMETER SYMBOL TEST CONDITIONS TA V+ MIN TYP MAX UNIT Dynamic Turn-on time tON VCOM = V+, RL = 50 Ω, CL = 35 pF, See Figure 23 25°C 2.5 V 2 Full 2.3 V to 2.
PAGE 9
TS5A3359 1-Ω SP3T ANALOG SWITCH 5-V/3.3-V SINGLE-CHANNEL 3:1 MULTIPLEXER/DEMULTIPLEXER www.ti.com SCDS214C – OCTOBER 2005 – REVISED JANUARY 2008 ELECTRICAL CHARACTERISTICS FOR 1.8-V SUPPLY (1) V+ = 1.65 V to 1.95 V, TA = –40°C to 85°C (unless otherwise noted) PARAMETER SYMBOL TEST CONDITIONS TA V+ MIN TYP MAX UNIT Analog Switch Analog signal range VCOM, VNO 0 Peak ON resistance rpeak 0 ≤ (VNO) ≤ V+, ICOM = –2 mA, Switch ON, See Figure 19 25°C ON-state resistance ron VNO = 1.
PAGE 10
TS5A3359 1-Ω SP3T ANALOG SWITCH 5-V/3.3-V SINGLE-CHANNEL 3:1 MULTIPLEXER/DEMULTIPLEXER www.ti.com SCDS214C – OCTOBER 2005 – REVISED JANUARY 2008 ELECTRICAL CHARACTERISTICS FOR 1.8-V SUPPLY (continued) V+ = 1.65 V to 1.95 V, TA = –40°C to 85°C (unless otherwise noted) PARAMETER SYMBOL TEST CONDITIONS TA V+ MIN TYP MAX 38.5 85 UNIT Dynamic Turn-on time tON VCOM = V+, RL = 50 Ω, CL = 35 pF, See Figure 23 25°C 1.8 V 3 Full 1.65 V to 1.
PAGE 11
TS5A3359 1-Ω SP3T ANALOG SWITCH 5-V/3.3-V SINGLE-CHANNEL 3:1 MULTIPLEXER/DEMULTIPLEXER www.ti.com SCDS214C – OCTOBER 2005 – REVISED JANUARY 2008 TYPICAL PERFORMANCE 1.4 TA = 25°C 1.2 TA = 85°C ron (Ω) (Ω) 1.0 0.8 0.6 TA = –40°C 0.4 0.2 0.0 0.0 0.5 Figure 1. ron vs VCOM 1.5 2.0 VCOM (V) 2.5 3.0 3.5 Figure 2. ron vs VCOM (V+ = 3.3 V) °C °C °C (Ω) °C 1.0 °C Figure 3. ron vs VCOM (V+ = 5 V) °C Figure 4. Leakage Current vs Temperature °C °C °C °C °C °C Figure 5.
PAGE 12
TS5A3359 1-Ω SP3T ANALOG SWITCH 5-V/3.3-V SINGLE-CHANNEL 3:1 MULTIPLEXER/DEMULTIPLEXER www.ti.com SCDS214C – OCTOBER 2005 – REVISED JANUARY 2008 TYPICAL PERFORMANCE (continued) °C °C °C Figure 7. Leakage Current vs Temperature Figure 8. Charge Injection (QC) vs VCOM (°C) 12 Figure 9. tON and tOFF vs Supply Voltage Figure 10. tON and tOFF vs Temperature Figure 11. Logic-Level Threshold vs V+ Figure 12.
PAGE 13
TS5A3359 1-Ω SP3T ANALOG SWITCH 5-V/3.3-V SINGLE-CHANNEL 3:1 MULTIPLEXER/DEMULTIPLEXER www.ti.com SCDS214C – OCTOBER 2005 – REVISED JANUARY 2008 TYPICAL PERFORMANCE (continued) Figure 13. OFF Isolation vs Crosstalk Figure 14. Total Harmonic Distortion vs Frequency 0 –10 –20 PSRR (dB) –30 –40 –50 –60 –70 –80 –90 (°C) –100 100 k 1M 10 M Frequency (Hz) Figure 16. COM Port to NO2 PSRR, IN1 = VCC, IN2 = VCC (VCC = 5 V) 0 0 –10 –10 –20 –20 –30 –30 PSRR (dB) PSRR (dB) Figure 15.
PAGE 14
TS5A3359 1-Ω SP3T ANALOG SWITCH 5-V/3.3-V SINGLE-CHANNEL 3:1 MULTIPLEXER/DEMULTIPLEXER SCDS214C – OCTOBER 2005 – REVISED JANUARY 2008 www.ti.com PIN DESCRIPTION PIN NO.
PAGE 15
www.ti.com TS5A3359 1-Ω SP3T ANALOG SWITCH 5-V/3.3-V SINGLE-CHANNEL 3:1 MULTIPLEXER/DEMULTIPLEXER SCDS214C – OCTOBER 2005 – REVISED JANUARY 2008 PARAMETER DESCRIPTION (continued) SYMBOL THD I+ DESCRIPTION Total harmonic distortion describes the signal distortion caused by the analog switch. This is defined as the ratio of root mean square (RMS) value of the second, third, and higher harmonic to the absolute magnitude of the fundamental harmonic.
PAGE 16
TS5A3359 1-Ω SP3T ANALOG SWITCH 5-V/3.3-V SINGLE-CHANNEL 3:1 MULTIPLEXER/DEMULTIPLEXER www.ti.com SCDS214C – OCTOBER 2005 – REVISED JANUARY 2008 PARAMETER MEASURMENT INFORMATION ron = VCOM – VNO ICOM Ω Figure 19. ON-State Resistance (ron) Current Figure 20. OFF-State Leakage Current (INC(OFF), INO(OFF), INO(PWROFF), ICOM(OFF), ICOM(PWROFF)) Current Figure 21.
PAGE 17
www.ti.com TS5A3359 1-Ω SP3T ANALOG SWITCH 5-V/3.3-V SINGLE-CHANNEL 3:1 MULTIPLEXER/DEMULTIPLEXER SCDS214C – OCTOBER 2005 – REVISED JANUARY 2008 PARAMETER MEASURMENT INFORMATION (continued) Capacitance Meter VBIAS = V+ or GND VI = V+ or GND Capacitance is measured at NO, COM, and IN inputs during ON and OFF conditions. VBIAS Figure 22. Capacitance (CI, CCOM(ON), CNO(OFF), CCOM(OFF), CNO(ON)) 50 Ω 35 pF 50 Ω 35 pF (B) CL CL Logic (B) (A) Input tOFF A.
PAGE 18
TS5A3359 1-Ω SP3T ANALOG SWITCH 5-V/3.3-V SINGLE-CHANNEL 3:1 MULTIPLEXER/DEMULTIPLEXER www.ti.com SCDS214C – OCTOBER 2005 – REVISED JANUARY 2008 PARAMETER MEASURMENT INFORMATION (continued) CL (B) Logic (A) Input Ω A. All input pulses are supplied by generators having the following characteristics: PRR ≤ 10 MHz, ZO = 50 Ω, tr < 5 ns, tf < 5 ns. B. CL includes probe and jig capacitance. Figure 24.
PAGE 19
TS5A3359 1-Ω SP3T ANALOG SWITCH 5-V/3.3-V SINGLE-CHANNEL 3:1 MULTIPLEXER/DEMULTIPLEXER www.ti.com SCDS214C – OCTOBER 2005 – REVISED JANUARY 2008 PARAMETER MEASURMENT INFORMATION (continued) Ω Channel OFF: NO0 to COM Ω NO1–NO2 Network Analyzer Setup Source Power = 0 dBM (632-mV P-P at 50-Ω load) Ω DC Bias = 350 mV Figure 26.
PAGE 20
TS5A3359 1-Ω SP3T ANALOG SWITCH 5-V/3.3-V SINGLE-CHANNEL 3:1 MULTIPLEXER/DEMULTIPLEXER www.ti.com SCDS214C – OCTOBER 2005 – REVISED JANUARY 2008 PARAMETER MEASURMENT INFORMATION (continued) VIH VIL ΔVCOM CL (B) VGEN = 0 to V+ RGEN = 0 CL = 1 nF QC = CL x ΔVCOM VI = VIH or VIL Logic (A) Input A. All input pulses are supplied by generators having the following characteristics: PRR ≤ 10 MHz, ZO = 50 Ω, tr < 5 ns, tf < 5 ns. B. CL includes probe and jig capacitance. Figure 28.
PAGE 21
PACKAGE OPTION ADDENDUM www.ti.
PAGE 22
PACKAGE OPTION ADDENDUM www.ti.com 25-Sep-2013 (5) Multiple Device Markings will be inside parentheses. Only one Device Marking contained in parentheses and separated by a "~" will appear on a device. If a line is indented then it is a continuation of the previous line and the two combined represent the entire Device Marking for that device. Important Information and Disclaimer:The information provided on this page represents TI's knowledge and belief as of the date that it is provided.
PAGE 23
PACKAGE MATERIALS INFORMATION www.ti.com 23-Sep-2013 TAPE AND REEL INFORMATION *All dimensions are nominal Device Package Package Pins Type Drawing SPQ Reel Reel A0 Diameter Width (mm) (mm) W1 (mm) B0 (mm) K0 (mm) P1 (mm) W Pin1 (mm) Quadrant TS5A3359DCUR US8 DCU 8 3000 180.0 8.4 2.25 3.35 1.05 4.0 8.0 Q3 TS5A3359YZPR DSBGA YZP 8 3000 180.0 8.4 1.02 2.02 0.63 4.0 8.
PAGE 24
PACKAGE MATERIALS INFORMATION www.ti.com 23-Sep-2013 *All dimensions are nominal Device Package Type Package Drawing Pins SPQ Length (mm) Width (mm) Height (mm) TS5A3359DCUR US8 DCU 8 3000 202.0 201.0 28.0 TS5A3359YZPR DSBGA YZP 8 3000 220.0 220.0 34.
PAGE 25
PAGE 26
PAGE 27
D: Max = 1.918 mm, Min =1.858 mm E: Max = 0.918 mm, Min =0.
PAGE 28
IMPORTANT NOTICE Texas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, enhancements, improvements and other changes to its semiconductor products and services per JESD46, latest issue, and to discontinue any product or service per JESD48, latest issue. Buyers should obtain the latest relevant information before placing orders and should verify that such information is current and complete.