Datasheet
www.ti.com
ABSOLUTE MINIMUM AND MAXIMUM RATINGS
(1) (2)
PACKAGE THERMAL IMPEDANCE
TS5A3357
SINGLE 5- Ω SP3T ANALOG SWITCH
5-V/3.3-V 3:1 MULTIPLEXER/DEMULTIPLEXER
SCDS177A – OCTOBER 2004 – REVISED DECEMBER 2007
ORDERING INFORMATION
T
A
PACKAGE
(1) (2)
ORDERABLE PART NUMBER TOP-SIDE MARKING
(3)
– 40 ° C to 85 ° C SOT (SC-70) – DCU Tape and reel TS5A3357DCUR JA9_
(1) Package drawings, thermal data, and symbolization are available at www.ti.com/packaging .
(2) For the most current package and ordering information, see the Package Option Addendum at the end of this document, or see the TI
website at www.ti.com .
(3) DCU: The actual top-side marking has one additional character that designates the assembly/test site.
over operating free-air temperature range (unless otherwise noted)
MIN MAX UNIT
V
+
Supply voltage range
(3)
– 0.5 6.5 V
V
NO
Analog voltage range
(3) (4) (5)
– 0.5 V
+
+ 0.5 V
V
COM
I
K
Analog port diode current V
NO
, V
COM
< 0 or V
NO
, V
COM
> V
+
– 50 50 mA
I
NO
On-state switch current V
NO
, V
COM
= 0 to V
+
– 100 100 mA
I
COM
V
I
Digital input voltage range
(3) (4)
– 0.5 6.5 V
I
IK
Digital input clamp current V
I
< 0 – 50 mA
I
+
Continuous current through V
+
100 mA
I
GND
Continuous current through GND – 100 100 mA
T
stg
Storage temperature range – 65 150 ° C
(1) Stresses above these ratings may cause permanent damage. Exposure to absolute maximum conditions for extended periods may
degrade device reliability. These are stress ratings only, and functional operation of the device at these or any other conditions beyond
those specified is not implied.
(2) The algebraic convention, whereby the most negative value is a minimum and the most positive value is a maximum.
(3) All voltages are with respect to ground, unless otherwise specified.
(4) The input and output voltage ratings may be exceeded if the input and output clamp-current ratings are observed.
(5) This value is limited to 5.5 V maximum.
MAX UNIT
θ
JA
Package thermal impedance
(1)
165 ° C/W
(1) The package thermal impedance is calculated in accordance with JESD 51-7.
2 Submit Documentation Feedback Copyright © 2004 – 2007, Texas Instruments Incorporated
Product Folder Link(s): TS5A3357