Datasheet

TS5A3160
www.ti.com SCDS216C –OCTOBER 2005–REVISED MARCH 2012
Table 4. PARAMETER DESCRIPTION (continued)
SYMBOL DESCRIPTION
C
NO(ON)
Capacitance at the NO port when the corresponding channel (NO to COM) is ON
C
COM(ON)
Capacitance at the COM port when the corresponding channel (COM to NO) is ON
C
I
Capacitance of IN
OFF isolation of the switch is a measurement of OFF-state switch impedance. This is measured in dB in a specific
O
ISO
frequency, with the corresponding channel (NO to COM) in the OFF state.
Crosstalk is a measurement of unwanted signal coupling from an ON channel to an adjacent ON channel (NC1 to NC2).
X
TALK
This is measured in a specific frequency and in dB.
BW Bandwidth of the switch. This is the frequency in which the gain of an ON channel is -3 dB below the DC gain.
Total harmonic distortion is defined as the ratio of the root mean square (RMS) value of the second, third, and higher
THD
harmonics to the magnitude of fundamental harmonic.
I
+
Static power-supply current with the control (IN) pin at V
+
or GND
Copyright © 2005–2012, Texas Instruments Incorporated Submit Documentation Feedback 15
Product Folder Link(s): TS5A3160