Datasheet

www.ti.com
Absolute Maximum Ratings
(1)
TS5A3159-EP
1- Ω SPDT ANALOG SWITCH
SCDS217B – DECEMBER 2005 – REVISED JANUARY 2006
ORDERING INFORMATION
T
A
PACKAGE
(1)
ORDERABLE PART NUMBER TOP-SIDE MARKING
–55 ° C to 125 ° C SOT (SOT-23) – DBV Tape and reel TS5A3159MDBVREP JA8R
(1) Package drawings, standard packing quantities, thermal data, symbolization, and PCB design guidelines are available at
www.ti.com/sc/package.
FUNCTION TABLE
NC TO COM, NO TO COM,
IN
COM TO NC COM TO NO
L ON OFF
H OFF ON
over operating free-air temperature range (unless otherwise noted)
MIN MAX UNIT
V
+
Supply voltage range
(2)
–0.5 6.5 V
V
NO
Analog voltage range
(2) (3) (4)
–0.5 V
+
+ 0.5 V
V
COM
I
I/OK
Analog port diode current V
NO
, V
COM
< 0 or V
NO
, V
COM
> V
+
± 50 mA
I
NO
On-state switch current V
NO
, V
COM
= 0 to V
+
± 200 mA
I
COM
On-state peak switch current
(5)
± 400 mA
V
IN
Digital input voltage range
(2) (3)
–0.5 6.5 V
I
IK
Digital input clamp current V
IN
< 0 –50 mA
Continuous current through V
+
or GND ± 100 mA
θ
JA
Package thermal impedance
(6)
165 ° C/W
T
stg
Storage temperature range –65 150 ° C
(1) Stresses beyond those listed under "absolute maximum ratings" may cause permanent damage to the device. These are stress ratings
only, and functional operation of the device at these or any other conditions beyond those indicated under "Electrical Characteristics" is
not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.
(2) All voltages are with respect to ground, unless otherwise specified.
(3) The input and output voltage ratings may be exceeded if the input and output clamp-current ratings are observed.
(4) This value is limited to 5.5 V maximum.
(5) Pulse at 1-ms duration < 10% duty cycle.
(6) The package thermal impedance is calculated in accordance with JESD 51-7.
2
Submit Documentation Feedback