Datasheet

ManualsBrandsTEXAS INSTRUMENTS ManualsInterface ICsInterface IC - analogue switches VSSOP 10

www.ti.com

FEATURES APPLICATIONS

IN2

VSSOP PACKAGE

(TOP VIEW)

IN1

NO1

GND

NO2

NC1

COM1

NC2

COM2

DESCRIPTION

TS5A23160

0.9- Ω DUAL SPDT ANALOG SWITCH

5-V/3.3-V 2-CHANNEL 2:1 MULTIPLEXER/DEMULTIPLEXER

SCDS210A – AUGUST 2005 – REVISED APRIL 2006

• Cell Phones

• Specified Make-Before-Break Switching

• PDAs

• Low ON-State Resistance (1 Ω )

• Portable Instrumentation

• Control Inputs Are 5.5-V Tolerant

• Audio and Video Signal Routing

• Low Charge Injection

• Low-Voltage Data Acquisition Systems

• Excellent ON-State Resistance Matching

• Communication Circuits

• Low Total Harmonic Distortion (THD)

• Modems

• 1.65-V to 5.5-V Single-Supply Operation

• Hard Drives

• Latch-Up Performance Exceeds 100 mA Per

• Computer Peripherals

JESD 78, Class II

• Wireless Terminals and Peripherals

• ESD Performance Tested Per JESD 22

– 2000-V Human-Body Model

(A114-B, Class II)

– 1000-V Charged-Device Model (C101)

The TS5A23160 is a dual single-pole double-throw (SPDT) analog switch that is designed to operate from

1.65 V to 5.5 V. The device offers a low ON-state resistance and an excellent channel-to-channel ON-state

resistance matching. The device has excellent total harmonic distortion (THD) performance and consumes very

low power. These features make this device suitable for portable audio applications.

FUNCTION TABLE

NC TO COM, NO TO COM,

COM TO NC COM TO NO

L ON OFF

H OFF ON

Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas

Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.

PRODUCTION DATA information is current as of publication date.

Products conform to specifications per the terms of the Texas

Instruments standard warranty. Production processing does not

necessarily include testing of all parameters.

Summary of content (25 pages)

PAGE 1
TS5A23160 0.9-Ω DUAL SPDT ANALOG SWITCH 5-V/3.3-V 2-CHANNEL 2:1 MULTIPLEXER/DEMULTIPLEXER www.ti.com SCDS210A – AUGUST 2005 – REVISED APRIL 2006 FEATURES APPLICATIONS • • • • • • • • • • • • • • • • • • • Specified Make-Before-Break Switching Low ON-State Resistance (1 Ω) Control Inputs Are 5.5-V Tolerant Low Charge Injection Excellent ON-State Resistance Matching Low Total Harmonic Distortion (THD) 1.65-V to 5.
PAGE 2
TS5A23160 0.9-Ω DUAL SPDT ANALOG SWITCH 5-V/3.3-V 2-CHANNEL 2:1 MULTIPLEXER/DEMULTIPLEXER www.ti.com SCDS210A – AUGUST 2005 – REVISED APRIL 2006 SUMMARY OF CHARACTERISTICS (1) Dual 2:1 Multiplexer/ Demultiplexer (2 × SPDT) Configuration Number of channels 2 ON-state resistance (ron) 0.9 Ω ON-state resistance match (∆ron) 0.1 Ω ON-state resistance flatness (ron(flat)) 0.15 Ω Turn-on/turn-off time (tON/tOFF) 2.5 ns/6 ns Make-before-break time (tMBB) 5.
PAGE 3
TS5A23160 0.9-Ω DUAL SPDT ANALOG SWITCH 5-V/3.3-V 2-CHANNEL 2:1 MULTIPLEXER/DEMULTIPLEXER www.ti.com SCDS210A – AUGUST 2005 – REVISED APRIL 2006 Absolute Maximum Ratings (1) (2) over operating free-air temperature range (unless otherwise noted) MIN MAX V+ Supply voltage range (3) –0.5 6.5 V VNC VNO VCOM Analog voltage range (3) (4) (5) –0.5 V+ + 0.
PAGE 4
TS5A23160 0.9-Ω DUAL SPDT ANALOG SWITCH 5-V/3.3-V 2-CHANNEL 2:1 MULTIPLEXER/DEMULTIPLEXER www.ti.com SCDS210A – AUGUST 2005 – REVISED APRIL 2006 Electrical Characteristics for 5-V Supply (1) V+ = 4.5 V to 5.
PAGE 5
TS5A23160 0.9-Ω DUAL SPDT ANALOG SWITCH 5-V/3.3-V 2-CHANNEL 2:1 MULTIPLEXER/DEMULTIPLEXER www.ti.com SCDS210A – AUGUST 2005 – REVISED APRIL 2006 Electrical Characteristics for 5-V Supply (continued) V+ = 4.5 V to 5.5 V, TA = –40°C to 85°C (unless otherwise noted) PARAMETER SYMBOL Digital Control Inputs (IN1, TEST CONDITIONS TA V+ MIN TYP MAX UNIT IN2) (2) Input logic high VIH Full 2.4 5.5 V Input logic low VIL Full 0 0.
PAGE 6
TS5A23160 0.9-Ω DUAL SPDT ANALOG SWITCH 5-V/3.3-V 2-CHANNEL 2:1 MULTIPLEXER/DEMULTIPLEXER www.ti.com SCDS210A – AUGUST 2005 – REVISED APRIL 2006 Electrical Characteristics for 3.3-V Supply (1) V+ = 3 V to 3.
PAGE 7
TS5A23160 0.9-Ω DUAL SPDT ANALOG SWITCH 5-V/3.3-V 2-CHANNEL 2:1 MULTIPLEXER/DEMULTIPLEXER www.ti.com SCDS210A – AUGUST 2005 – REVISED APRIL 2006 Electrical Characteristics for 3.3-V Supply (continued) V+ = 3 V to 3.6 V, TA = –40°C to 85°C (unless otherwise noted) PARAMETER SYMBOL Digital Control Inputs (IN1, TEST CONDITIONS TA V+ MIN TYP MAX UNIT IN2) (2) Input logic high VIH Full 2 5.5 V Input logic low VIL Full 0 0.8 V Input leakage current IIH, IIL 25°C VI = 5.
PAGE 8
TS5A23160 0.9-Ω DUAL SPDT ANALOG SWITCH 5-V/3.3-V 2-CHANNEL 2:1 MULTIPLEXER/DEMULTIPLEXER www.ti.com SCDS210A – AUGUST 2005 – REVISED APRIL 2006 Electrical Characteristics for 2.5-V Supply (1) V+ = 2.3 V to 2.7 V, TA = –40°C to 85°C (unless otherwise noted) PARAMETER SYMBOL TEST CONDITIONS TA V+ MIN TYP MAX UNIT Analog Switch Analog signal range VCOM, VNO, VNC 0 ≤ (VNO or VNC) ≤ V+, ICOM = –8 mA, Switch ON, See Figure 14 25°C ron VNO or VNC = 1.
PAGE 9
TS5A23160 0.9-Ω DUAL SPDT ANALOG SWITCH 5-V/3.3-V 2-CHANNEL 2:1 MULTIPLEXER/DEMULTIPLEXER www.ti.com SCDS210A – AUGUST 2005 – REVISED APRIL 2006 Electrical Characteristics for 2.5-V Supply (continued) V+ = 2.3 V to 2.7 V, TA = –40°C to 85°C (unless otherwise noted) PARAMETER SYMBOL Digital Control Inputs (IN1, TEST CONDITIONS TA V+ MIN TYP MAX UNIT IN2) (2) Input logic high VIH Full 1.8 5.5 V Input logic low VIL Full 0 0.6 V Input leakage current IIH, IIL 25°C VI = 5.
PAGE 10
TS5A23160 0.9-Ω DUAL SPDT ANALOG SWITCH 5-V/3.3-V 2-CHANNEL 2:1 MULTIPLEXER/DEMULTIPLEXER www.ti.com SCDS210A – AUGUST 2005 – REVISED APRIL 2006 Electrical Characteristics for 1.8-V Supply (1) V+ = 1.65 V to 1.
PAGE 11
TS5A23160 0.9-Ω DUAL SPDT ANALOG SWITCH 5-V/3.3-V 2-CHANNEL 2:1 MULTIPLEXER/DEMULTIPLEXER www.ti.com SCDS210A – AUGUST 2005 – REVISED APRIL 2006 Electrical Characteristics for 1.8-V Supply (continued) V+ = 1.65 V to 1.95 V, TA = –40°C to 85°C (unless otherwise noted) PARAMETER SYMBOL Digital Control Inputs (IN1, TEST CONDITIONS TA V+ MIN TYP MAX UNIT IN2) (2) Input logic high VIH Full 1.5 5.5 V Input logic low VIL Full 0 0.6 V Input leakage current IIH, IIL 25°C VI = 5.
PAGE 12
TS5A23160 0.9-Ω DUAL SPDT ANALOG SWITCH 5-V/3.3-V 2-CHANNEL 2:1 MULTIPLEXER/DEMULTIPLEXER www.ti.com SCDS210A – AUGUST 2005 – REVISED APRIL 2006 TYPICAL PERFORMANCE 3.5 3 1.3 1.1 V+ = 1.8 V 2 ron (Ω) ron (Ω) 2.5 V+ = 2.5 V V+ = 3 V 1.5 0.9 0.7 0.5 1 0.3 0.5 0 TA = 85°C TA = 25°C TA = −40°C 1.5 TA = 25 C 0.1 V+ = 4.5 V 0 1 2 VCOM (V) 0 3 1 4 Figure 1. ron vs VCOM 3 4 Figure 2. ron vs VCOM (V+ = 3.3 V) 1.0 20 V+ = 5 V 0.8 TA = 85°C 0.7 TA = 25°C 0.6 TA = −40°C 0.5 0.
PAGE 13
TS5A23160 0.9-Ω DUAL SPDT ANALOG SWITCH 5-V/3.3-V 2-CHANNEL 2:1 MULTIPLEXER/DEMULTIPLEXER www.ti.com SCDS210A – AUGUST 2005 – REVISED APRIL 2006 TYPICAL PERFORMANCE (continued) 16 7 tOFF 14 6 tOFF 5 10 tON/tOFF (ns) ton/tOFF (ns) 12 tON 8 6 4 2 4 3 2 tON 1 0 0 1 2 3 4 5 0 6 −40°C 25°C TA ( C) V+ (V) Figure 7. tON and tOFF vs Supply Voltage 85°C Figure 8. tON and tOFF vs Temperature (V+ = 5 V) 2.5 2.5 0 VIN rising −2 2 2.0 −4 VIN Gain (dB) VIN falling 1.5 1.5 1 1.
PAGE 14
TS5A23160 0.9-Ω DUAL SPDT ANALOG SWITCH 5-V/3.3-V 2-CHANNEL 2:1 MULTIPLEXER/DEMULTIPLEXER www.ti.com SCDS210A – AUGUST 2005 – REVISED APRIL 2006 TYPICAL PERFORMANCE (continued) 250 I+ (µA) 200 150 100 50 0 −50 −40°C 25°C 85°C TA ( C) Figure 13.
PAGE 15
TS5A23160 0.9-Ω DUAL SPDT ANALOG SWITCH 5-V/3.3-V 2-CHANNEL 2:1 MULTIPLEXER/DEMULTIPLEXER www.ti.
PAGE 16
TS5A23160 0.9-Ω DUAL SPDT ANALOG SWITCH 5-V/3.3-V 2-CHANNEL 2:1 MULTIPLEXER/DEMULTIPLEXER www.ti.com SCDS210A – AUGUST 2005 – REVISED APRIL 2006 PARAMETER MEASUREMENT INFORMATION V+ VNC NC COM + VCOM Channel ON VNO NO r on IN VI ICOM VCOM VNO or VNC I COM VI = VIH or VIL + GND Figure 14. ON-State Resistance (ron) V+ VNC NC COM + VCOM + VNO NO IN OFF-State Leakage Current Channel OFF VI = VIH or VIL VI + GND Figure 15.
PAGE 17
TS5A23160 0.9-Ω DUAL SPDT ANALOG SWITCH 5-V/3.3-V 2-CHANNEL 2:1 MULTIPLEXER/DEMULTIPLEXER www.ti.com SCDS210A – AUGUST 2005 – REVISED APRIL 2006 PARAMETER MEASUREMENT INFORMATION (continued) V+ Capacitance Meter VNC NC VNO NO VBIAS = V+ or GND VI = V+ or GND VCOM COM VBIAS VI Capacitance is measured at NC, NO, COM, and IN inputs during ON and OFF conditions. IN GND Figure 17.
PAGE 18
TS5A23160 0.9-Ω DUAL SPDT ANALOG SWITCH 5-V/3.3-V 2-CHANNEL 2:1 MULTIPLEXER/DEMULTIPLEXER www.ti.com SCDS210A – AUGUST 2005 – REVISED APRIL 2006 PARAMETER MEASUREMENT INFORMATION (continued) V+ VNC NC VCOM COM NO VI Logic Input (VI) VNO CL(2) RL Switch Output CL(2) RL VCOM = V+ RL = 50 Ω CL = 35 pF GND 0 VNC IN Logic Input(1) V+ 50% 0.8 VOUT 0.8 VOUT VNQ tMBB A.
PAGE 19
TS5A23160 0.9-Ω DUAL SPDT ANALOG SWITCH 5-V/3.3-V 2-CHANNEL 2:1 MULTIPLEXER/DEMULTIPLEXER www.ti.com SCDS210A – AUGUST 2005 – REVISED APRIL 2006 PARAMETER MEASUREMENT INFORMATION (continued) V+ Network Analyzer Channel OFF: NC to COM 50 VNC NC VI = V+ or GND COM Source Signal 50 VCOM NO Network Analyzer Setup IN Source Power = 0 dBm (632-mV P-P at 50- load) VI 50 + GND DC Bias = 350 mV Figure 21.
PAGE 20
TS5A23160 0.9-Ω DUAL SPDT ANALOG SWITCH 5-V/3.3-V 2-CHANNEL 2:1 MULTIPLEXER/DEMULTIPLEXER www.ti.com SCDS210A – AUGUST 2005 – REVISED APRIL 2006 PARAMETER MEASUREMENT INFORMATION (continued) V+ RGEN VGEN Logic Input (VI) OFF ON OFF V IL NC or NO COM + VIH VCOM ∆VCOM VCOM NC or NO CL(2) VI VGEN = 0 to V+ IN Logic Input(1) A. RGEN = 0 CL = 1 nF QC = CL × ∆VCOM VI = VIH or VIL GND CL includes probe and jig capacitance. Figure 23.
PAGE 21
PACKAGE OPTION ADDENDUM www.ti.
PAGE 22
PACKAGE MATERIALS INFORMATION www.ti.com 17-Apr-2009 TAPE AND REEL INFORMATION *All dimensions are nominal Device TS5A23160DGSR Package Package Pins Type Drawing MSOP DGS 10 SPQ Reel Reel Diameter Width (mm) W1 (mm) 2500 330.0 12.4 Pack Materials-Page 1 A0 (mm) B0 (mm) K0 (mm) P1 (mm) 5.3 3.4 1.4 8.0 W Pin1 (mm) Quadrant 12.
PAGE 23
PACKAGE MATERIALS INFORMATION www.ti.com 17-Apr-2009 *All dimensions are nominal Device Package Type Package Drawing Pins SPQ Length (mm) Width (mm) Height (mm) TS5A23160DGSR MSOP DGS 10 2500 358.0 335.0 35.
PAGE 24
PAGE 25
IMPORTANT NOTICE Texas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, modifications, enhancements, improvements, and other changes to its products and services at any time and to discontinue any product or service without notice. Customers should obtain the latest relevant information before placing orders and should verify that such information is current and complete.