Datasheet

ManualsBrandsTEXAS INSTRUMENTS ManualsInterface ICsInterface IC - analogue switches VSSOP 10

IN2

DGS PACKAGE

(TOP VIEW)

IN1

NO1

GND

NO2

NC1

COM1

NC2

COM2

NC1

V+

NC2

COM2

IN1

NO1

GND

NO2

RSE PACKAGE

(TOP VIEW)

COM1

IN2

4 5 6

TS5A23159

www.ti.com

SCDS201G –AUGUST 2005–REVISED AUGUST 2013

1-Ω DUAL SPDT ANALOG SWITCH

5-V/3.3-V 2-CHANNEL 2:1 MULTIPLEXER/DEMULTIPLEXER

Check for Samples: TS5A23159

FEATURES

APPLICATIONS

• Isolation in Power-Down Mode, V

= 0 • Cell Phones

• Specified Break-Before-Make Switching • PDAs

• Low ON-State Resistance (1 Ω) • Portable Instrumentation

• Control Inputs Are 5.5-V Tolerant • Audio and Video Signal Routing

• Low Charge Injection • Low-Voltage Data-Acquisition Systems

• Excellent ON-State Resistance Matching • Communication Circuits

• Low Total Harmonic Distortion (THD) • Modems

• 1.65-V to 5.5-V Single-Supply Operation • Hard Drives

• Latch-Up Performance Exceeds 100 mA Per • Computer Peripherals

JESD 78, Class II

• Wireless Terminals and Peripherals

• ESD Performance Tested Per JESD 22

DESCRIPTION

– 2000-V Human-Body Model

The TS5A23159 is a dual single-pole double-throw

(A114-B, Class II)

(SPDT) analog switch that is designed to operate

– 1000-V Charged-Device Model (C101)

from 1.65 V to 5.5 V. The device offers low ON-state

resistance and excellent ON-state resistance

matching with the break-before-make feature, to

prevent signal distortion during the transferring of a

signal from one channel to another. The device has

an excellent total harmonic distortion (THD)

performance and consumes very low power. These

features make this device suitable for portable audio

applications.

Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of

Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.

PRODUCTION DATA information is current as of publication date.

Products conform to specifications per the terms of the Texas

Instruments standard warranty. Production processing does not

necessarily include testing of all parameters.

Summary of content (29 pages)

PAGE 1
TS5A23159 www.ti.com SCDS201G – AUGUST 2005 – REVISED AUGUST 2013 1-Ω DUAL SPDT ANALOG SWITCH 5-V/3.3-V 2-CHANNEL 2:1 MULTIPLEXER/DEMULTIPLEXER Check for Samples: TS5A23159 FEATURES APPLICATIONS • • • • • • • • • • • • • • • • • • • 1 • Isolation in Power-Down Mode, V+ = 0 Specified Break-Before-Make Switching Low ON-State Resistance (1 Ω) Control Inputs Are 5.5-V Tolerant Low Charge Injection Excellent ON-State Resistance Matching Low Total Harmonic Distortion (THD) 1.65-V to 5.
PAGE 2
TS5A23159 SCDS201G – AUGUST 2005 – REVISED AUGUST 2013 www.ti.com SUMMARY OF CHARACTERISTICS (1) Dual 2:1 Multiplexer/Demultiplexer (2 × SPDT) Configuration Number of channels 2 1.1 Ω ON-state resistance (ron) ON-state resistance match (Δron) 0.1 Ω ON-state resistance flatness (ron(flat)) 0.
PAGE 3
TS5A23159 www.ti.
PAGE 4
TS5A23159 SCDS201G – AUGUST 2005 – REVISED AUGUST 2013 www.ti.com Electrical Characteristics for 5-V Supply (1) V+ = 4.5 V to 5.5 V, TA = –40°C to 85°C (unless otherwise noted) PARAMETER SYMBOL TEST CONDITIONS TA V+ MIN TYP MAX UNIT Analog Switch Analog signal range VCOM, VNO, VNC 0 ≤ (VNO or VNC) ≤ V+, ICOM = –100 mA, Switch ON, See Figure 14 25°C ron VNO or VNC = 2.5 V, ICOM = –100 mA, Switch ON, See Figure 14 25°C Δron VNO or VNC = 2.
PAGE 5
TS5A23159 www.ti.com SCDS201G – AUGUST 2005 – REVISED AUGUST 2013 Electrical Characteristics for 5-V Supply(1) (continued) V+ = 4.5 V to 5.5 V, TA = –40°C to 85°C (unless otherwise noted) PARAMETER SYMBOL TEST CONDITIONS TA V+ MIN TYP MAX 25°C 5V 1 8 13 Full 4.5 V to 5.5 V 1 25°C 5V 1 Full 4.5 V to 5.5 V 1 25°C 5V 1 Full 4.5 V to 5.
PAGE 6
TS5A23159 SCDS201G – AUGUST 2005 – REVISED AUGUST 2013 www.ti.com Electrical Characteristics for 3.3-V Supply (1) V+ = 3 V to 3.
PAGE 7
TS5A23159 www.ti.com SCDS201G – AUGUST 2005 – REVISED AUGUST 2013 Electrical Characteristics for 3.3-V Supply(1) (continued) V+ = 3 V to 3.6 V, TA = –40°C to 85°C (unless otherwise noted) PARAMETER SYMBOL TEST CONDITIONS TA V+ MIN TYP MAX UNIT Dynamic 25°C 3.3 V 5 Full 3 V to 3.6 V 3 25°C 3.3 V 1 Full 3 V to 3.6 V 1 25°C 3.3 V 1 Full 3 V to 3.6 V 1 CL = 1 nF, See Figure 23 25°C 3.
PAGE 8
TS5A23159 SCDS201G – AUGUST 2005 – REVISED AUGUST 2013 www.ti.com Electrical Characteristics for 2.5-V Supply (1) V+ = 2.3 V to 2.7 V, TA = –40°C to 85°C (unless otherwise noted) PARAMETER SYMBOL TEST CONDITIONS TA V+ MIN TYP MAX 0 V+ UNIT Analog Switch Analog signal range VCOM, VNO, VNC Peak ON resistance rpeak ON-state resistance ron ON-state resistance match between channels ON-state resistance flatness NC, NO OFF leakage current Switch ON, See Figure 14 25°C VNO or VNC = 1.
PAGE 9
TS5A23159 www.ti.com SCDS201G – AUGUST 2005 – REVISED AUGUST 2013 Electrical Characteristics for 2.5-V Supply (1) (Continued) V+ = 2.3 V to 2.7 V, TA = –40°C to 85°C (unless otherwise noted) PARAMETER SYMBOL TEST CONDITIONS TA V+ MIN TYP MAX UNIT Dynamic 25°C 2.5 V 5 Full 2.3 V to 2.7 V 5 25°C 2.5 V 2 Full 2.3 V to 2.7 V 2 25°C 2.5 V 1 Full 2.3 V to 2.7 V 1 CL = 1 nF, See Figure 23 25°C 2.
PAGE 10
TS5A23159 SCDS201G – AUGUST 2005 – REVISED AUGUST 2013 www.ti.com Electrical Characteristics for 1.8-V Supply (1) V+ = 1.65 V to 1.
PAGE 11
TS5A23159 www.ti.com SCDS201G – AUGUST 2005 – REVISED AUGUST 2013 Electrical Characteristics for 1.8-V Supply (1) (Continued) V+ = 1.65 V to 1.95 V, TA = –40°C to 85°C (unless otherwise noted) PARAMETER SYMBOL TEST CONDITIONS TA V+ MIN TYP MAX UNIT Dynamic 25°C 1.8 V 10 Full 1.65 V to 1.95 V 10 25°C 1.8 V 2 Full 1.65 V to 1.95 V 2 25°C 1.8 V 1 Full 1.65 V to 1.95 V 1 CL = 1 nF, See Figure 23 25°C 1.
PAGE 12
TS5A23159 SCDS201G – AUGUST 2005 – REVISED AUGUST 2013 www.ti.com TYPICAL PERFORMANCE 3.5 3 1.3 1.1 ron (Ω) 2.5 V+ = 1.8 V 2 ron (Ω) TA = 85°C TA = 25°C TA = −40°C 1.5 TA = 255C V+ = 2.5 V 1.5 0.9 0.7 0.5 V+ = 3 V 1 0.3 0.5 0.1 V+ = 4.5 V 0 1 2 VCOM (V) 0 0 1 2 VCOM (V) Figure 1. ron vs VCOM 3 4 3 4 Figure 2. ron vs VCOM (V+ = 3.3 V) 1.0 20 COM (on) 0.9 0.8 Leakage (nA) ron (Ω) 0.7 0.6 0.5 0.4 TA = 85°C TA = 25°C TA = −40°C 0.3 0.
PAGE 13
TS5A23159 www.ti.com SCDS201G – AUGUST 2005 – REVISED AUGUST 2013 TYPICAL PERFORMANCE (continued) 35 10 tON 30 9 8 tON/tOFF (ns) tON/tOFF (ns) 25 20 15 10 tOFF tOFF 7 6 tON 5 4 3 2 5 1 0 0 1 2 3 4 5 0 6 −40°C V+ (V) Figure 7. tON and tOFF vs Supply Voltage Figure 8. tON 2.5 25°C 85°C TA (5C) and tOFF vs Temperature (5-V Supply) 0 VIN rising −2 2.0 Gain (dB) VIN (V) −4 VIN falling 1.5 1.0 −6 −8 −10 0.5 −12 0.0 0 1 2 3 4 5 −14 0.1 6 V+ (V) Figure 9.
PAGE 14
TS5A23159 SCDS201G – AUGUST 2005 – REVISED AUGUST 2013 www.ti.com TYPICAL PERFORMANCE (continued) 250 200 I+ (nA) 150 100 50 0 -50 -40 °C 25°C 85°C TA (°C) Figure 13. Power-Supply Current vs Temperature (V+ = 5 V) Table 1. PIN DESCRIPTION PIN NO.
PAGE 15
TS5A23159 www.ti.com SCDS201G – AUGUST 2005 – REVISED AUGUST 2013 Table 2.
PAGE 16
TS5A23159 SCDS201G – AUGUST 2005 – REVISED AUGUST 2013 www.ti.com PARAMETER MEASUREMENT INFORMATION V+ VNC NC COM + VCOM VNO NO Channel ON r on + IN VI ICOM VCOM * VNO or VNC W I COM VI = VIH or VIL + GND Figure 14. ON-State Resistance (ron) V+ VNC NC COM + VCOM + VNO NO IN VI OFF-State Leakage Current Channel OFF VI = VIH or VIL + GND Figure 15.
PAGE 17
TS5A23159 www.ti.com SCDS201G – AUGUST 2005 – REVISED AUGUST 2013 V+ Capacitance Meter VNC NC VNO NO VBIAS = V+ or GND VI = V+ or GND VCOM COM VBIAS VI Capacitance is measured at NC, NO, COM, and IN inputs during ON and OFF conditions. IN GND Figure 17.
PAGE 18
TS5A23159 SCDS201G – AUGUST 2005 – REVISED AUGUST 2013 www.ti.com V+ NC or NO V+ Logic Input (VI) VNC or VNO VCOM 50% 0 COM NC or NO CL(2) VI IN (1) 90% 90% tBBM Logic Input(1) (2) Switch Output (VCOM) RL VNC or VNO = V+ RL = 50 Ω CL = 35 pF GND All input pulses are supplied by generators having the following characteristics: PRR ≤ 10 MHz, ZO = 50 Ω, tr < 5 ns, tf < 5 ns. CL includes probe and jig capacitance. Figure 19.
PAGE 19
TS5A23159 www.ti.com SCDS201G – AUGUST 2005 – REVISED AUGUST 2013 V+ Network Analyzer Channel OFF: NC to COM 50 W VNC NC VI = V+ or GND COM Source Signal 50 W VCOM NO Network Analyzer Setup IN Source Power = 0 dBm (632-mV P-P at 50-W load) VI 50 W + GND DC Bias = 350 mV Figure 21.
PAGE 20
TS5A23159 SCDS201G – AUGUST 2005 – REVISED AUGUST 2013 www.ti.com V+ RGEN VGEN Logic Input (VI) OFF ON OFF V IL NC or NO COM + VIH VCOM ∆VCOM VCOM NC or NO CL(2) VI VGEN = 0 to V+ IN Logic Input(1) (1) (2) RGEN = 0 CL = 1 nF QC = CL × ∆VCOM VI = VIH or VIL GND All input pulses are supplied by generators having the following characteristics: PRR ≤ 10 MHz, ZO = 50 Ω, tr < 5 ns, tf < 5 ns. CL includes probe and jig capacitance. Figure 23.
PAGE 21
TS5A23159 www.ti.com SCDS201G – AUGUST 2005 – REVISED AUGUST 2013 REVISION HISTORY Changes from Revision F (September 2010) to Revision G Page • Aligned package description throughout datasheet. ............................................................................................................. 1 • Removed Ordering Information Table. .................................................................................................................................
PAGE 22
PACKAGE OPTION ADDENDUM www.ti.
PAGE 23
PACKAGE OPTION ADDENDUM www.ti.com (4) 9-Nov-2013 There may be additional marking, which relates to the logo, the lot trace code information, or the environmental category on the device. (5) Multiple Device Markings will be inside parentheses. Only one Device Marking contained in parentheses and separated by a "~" will appear on a device. If a line is indented then it is a continuation of the previous line and the two combined represent the entire Device Marking for that device.
PAGE 24
PACKAGE MATERIALS INFORMATION www.ti.com 12-Aug-2013 TAPE AND REEL INFORMATION *All dimensions are nominal Device Package Package Pins Type Drawing SPQ Reel Reel A0 Diameter Width (mm) (mm) W1 (mm) B0 (mm) K0 (mm) P1 (mm) W Pin1 (mm) Quadrant TS5A23159DGSR VSSOP DGS 10 2500 330.0 12.4 5.3 3.4 1.4 8.0 12.0 Q1 TS5A23159RSER UQFN RSE 10 3000 179.0 8.4 1.75 2.25 0.65 4.0 8.0 Q1 TS5A23159RSER UQFN RSE 10 3000 180.0 9.5 1.68 2.18 0.9 4.0 8.
PAGE 25
PACKAGE MATERIALS INFORMATION www.ti.com 12-Aug-2013 *All dimensions are nominal Device Package Type Package Drawing Pins SPQ Length (mm) Width (mm) Height (mm) TS5A23159DGSR VSSOP DGS 10 2500 358.0 335.0 35.0 TS5A23159RSER UQFN RSE 10 3000 203.0 203.0 35.0 TS5A23159RSER UQFN RSE 10 3000 180.0 180.0 30.0 TS5A23159RSER UQFN RSE 10 3000 202.0 201.0 28.
PAGE 26
PAGE 27
PAGE 28
PAGE 29
IMPORTANT NOTICE Texas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, enhancements, improvements and other changes to its semiconductor products and services per JESD46, latest issue, and to discontinue any product or service per JESD48, latest issue. Buyers should obtain the latest relevant information before placing orders and should verify that such information is current and complete.