Datasheet

TS5A22366
SCDS262B –JANUARY 2009–REVISED MAY 2013 www.ti.com
ABSOLUTE MINIMUM AND MAXIMUM RATINGS
(1) (2)
over operating free-air temperature range (unless otherwise noted)
MIN MAX UNIT
V
+
Supply voltage range
(3)
–0.5 6 V
V
NC
V
NO
Analog voltage range
(3) (4) (5)
V
+
– 6 V
+
+ 0.5 V
V
COM
I
K
Analog port diode current
(6)
V
+
< V
NC
, V
NO
, V
COM
< 0 –50 50 V
I
NC
ON-state switch current –150 150
I
NO
V
NC
, V
NO
, V
COM
= 0 to V
+
mA
ON-state peak switch current
(7)
–300 300
I
COM
V
I
Digital input voltage range –0.5 6.5 V
I
IK
Digital input clamp current
(3) (4)
V
IO
< V
I
< 0 –50 mA
I
GND
Continuous current through V
+
or GND –100 100 mA
I
+
T
stg
Storage temperature range –65 150 °C
(1) Stresses above these ratings may cause permanent damage. Exposure to absolute maximum conditions for extended periods may
degrade device reliability. These are stress ratings only, and functional operation of the device at these or any other conditions beyond
those specified is not implied.
(2) The algebraic convention, whereby the most negative value is a minimum and the most positive value is a maximum
(3) All voltages are with respect to ground, unless otherwise specified.
(4) The input and output voltage ratings may be exceeded if the input and output clamp-current ratings are observed.
(5) This value is limited to 5.5 V maximum.
(6) Requires clamp diodes on analog port to V
+
.
(7) Pulse at 1-ms duration <10% duty cycle
THERMAL IMPEDANCE RATINGS
UNIT
θ
JA
Package thermal impedance
(1)
YFC package 106.2 °C/W
(1) The package thermal impedance is calculated in accordance with JESD 51-7.
4 Submit Documentation Feedback Copyright © 2009–2013, Texas Instruments Incorporated
Product Folder Links: TS5A22366