Datasheet
ABSOLUTE MAXIMUM RATINGS
(1) (2)
THERMAL IMPEDANCE
RECOMMENDED OPERATING CONDITIONS
TS5A21366
www.ti.com
................................................................................................................................................. SCDS285A – MARCH 2009 – REVISED OCTOBER 2009
over operating free-air temperature range (unless otherwise noted)
MIN MAX UNIT
V
+
Supply voltage range
(3)
– 0.5 6.5 V
V
NO
Analog voltage range
(3) (4) (5)
– 0.5 V
+
+ 0.5 V
V
COM
I
K
Analog port diode current V
NO
, V
COM
< 0 – 50 mA
ON-state switch current – 200 200
I
NO
V
NO,
V
COM
= 0 to V
+
mA
I
COM
ON-state peak switch current
(6)
– 400 400
V
I
Digital input voltage range
(3) (4)
– 0.5 6.5 V
I
IK
Digital input clamp current V
I
< 0 – 50 mA
I
+
Continuous current through V
+
100 mA
I
GND
Continuous current through GND – 100 100 mA
T
stg
Storage temperature range – 65 150 ° C
(1) Stresses beyond those listed under " absolute maximum ratings " may cause permanent damage to the device. These are stress ratings
only, and functional operation of the device at these or any other conditions beyond those indicated under " recommended operating
conditions " is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.
(2) The algebraic convention, whereby the most negative value is a minimum and the most positive value is a maximum
(3) All voltages are with respect to ground, unless otherwise specified.
(4) The input and output voltage ratings may be exceeded if the input and output clamp-current ratings are observed.
(5) This value is limited to 5.5 V maximum.
(6) Pulse at 1-ms duration < 10% duty cycle
UNIT
DCU package 227
θ
JA
Package thermal impedance
(1)
° C/W
RSE package 253
(1) The package thermal impedance is calculated in accordance with JESD 51-7.
over operating free-air temperature range (unless otherwise noted)
MIN MAX UNIT
V
+
Power supply voltage range
(1)
1.65 5.5 V
V
NO
Analog signal voltage range 0 V
+
V
V
COM
V
IN
Control input voltage range 0 5.5 V
T
A
Ambient temperature – 40 85 ° C
(1) V
+
needs to be supplied prior to the control input, refer to the Application Information section.
Copyright © 2009, Texas Instruments Incorporated Submit Documentation Feedback 3
Product Folder Link(s): TS5A21366