Datasheet

TRSF3223E
SLLS824A –AUGUST 2007–REVISED SEPTEMBER 2011 www.ti.com
Absolute Maximum Ratings
(1)
over operating free-air temperature range (unless otherwise noted)
MIN MAX UNIT
V
CC
Supply voltage range –0.3 6 V
V+ Positive-output supply voltage range
(2)
–0.3 7 V
V– Negative-output supply voltage range
(2)
0.3 –7 V
V+ – V– Supply voltage difference
(2)
13 V
Driver (FORCEOFF, FORCEON, EN) –0.3 6
V
I
Input voltage range V
Receiver –25 25
Driver –13.2 13.2
V
O
Output voltage range V
Receiver (INVALID) –0.3 V
CC
+ 0.3
DB package 70
θ
JA
Package thermal impedance
(3) (4)
DW package 58 °C/W
PW package 83
T
J
Operating virtual junction temperature 150 °C
T
stg
Storage temperature range –65 150 °C
(1) Stresses beyond those listed under "absolute maximum ratings" may cause permanent damage to the device. These are stress ratings
only, and functional operation of the device at these or any other conditions beyond those indicated under "recommended operating
conditions" is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.
(2) All voltages are with respect to network GND.
(3) Maximum power dissipation is a function of T
J
(max), θ
JA
, and T
A
. The maximum allowable power dissipation at any allowable ambient
temperature is P
D
= (T
J
(max) – T
A
)/θ
JA
. Operating at the absolute maximum T
J
of 150°C can affect reliability.
(4) The package thermal impedance is calculated in accordance with JESD 51-7.
Recommended Operating Conditions
(1)
See Figure 6
MIN NOM MAX UNIT
V
CC
= 3.3 V 3 3.3 3.6
Supply voltage V
V
CC
= 5 V 4.5 5 5.5
V
CC
= 3.3 V 2
Driver and control
V
IH
DIN, EN, FORCEOFF, FORCEON V
high-level input voltage
V
CC
= 5 V 2.4
Driver and control
V
IL
DIN, EN, FORCEOFF, FORCEON 0.8 V
low-level input voltage
Driver and control input voltage DIN, EN, FORCEOFF, FORCEON 0 5.5
V
I
V
Receiver input voltage –25 25
TRSF3223EC 0 70
T
A
Operating free-air temperature °C
TRSF3223EI –40 85
(1) Test conditions are C1–C4 = 0.1 μF at V
CC
= 3.3 V ± 0.3 V; C1 = 0.047 μF, C2–C4 = 0.33 μF at V
CC
= 5 V ± 0.5 V.
Electrical Characteristics
(1)
over recommended ranges of supply voltage and operating free-air temperature (unless otherwise noted) (see Figure 5)
PARAMETER TEST CONDITIONS MIN TYP
(2)
MAX UNIT
Input leakage EN, FORCEOFF,
I
I
±0.01 ±1 μA
current FORCEON
V
CC
= 3.3 V or 5 V, T
A
= 25°C,
Auto-powerdown disabled 0.3 1 mA
No load, FORCEOFF and FORCEON at V
CC
I
CC
Supply current Powered off No load, FORCEOFF at GND 1 10
μA
No load, FORCEOFF at V
CC
, FORCEON at GND,
Auto-powerdown enabled 1 10
All RIN are open or grounded
(1) Test conditions are C1–C4 = 0.1 μF at V
CC
= 3.3 V ± 0.3 V; C1 = 0.047 μF, C2–C4 = 0.33 μF at V
CC
= 5 V ± 0.5 V.
(2) All typical values are at V
CC
= 3.3 V or V
CC
= 5 V, and T
A
= 25°C.
4 Submit Documentation Feedback Copyright © 2007–2011, Texas Instruments Incorporated
Product Folder Link(s): TRSF3223E