Datasheet

TRS3386E
SLLS829C –APRIL 2007– REVISED MARCH 2011 www.ti.com
DRIVER SECTION
Electrical Characteristics
over operating free-air temperature range, V
CC
= V
L
= 3 V to 5.5 V, C1–C4 = 0.1 μF (tested at 3.3 V ± 10%), C1 = 0.047 μF,
C2–C4 = 0.33 μF (tested at 5 V ± 10%), T
A
= T
MIN
to T
MAX
(unless otherwise noted)
PARAMETER TEST CONDITIONS MIN TYP
(1)
MAX UNIT
V
OH
Output voltage swing All driver outputs loaded with 3 kΩ to ground ±5 ±5.4 V
r
O
Output resistance V
CC
= V+ = V– = 0, Driver output = ±2 V 300 10M Ω
I
OS
Output short-circuit current V
T_OUT
= 0 ±60 mA
V
T_OUT
= ±12 V, Driver disabled,
I
OZ
Output leakage current ±25 μA
V
CC
= 0 or 3 V to 5.5 V
Driver input hysteresis 0.5 V
Input leakage current DIN, PWRDWN ±0.01 ±1 μA
(1) Typical values are at V
CC
= V
L
= 3.3 V, T
A
= 25°C
Timing Requirements
over operating free-air temperature range, V
CC
= V
L
= 3 V to 5.5 V, C1–C4 = 0.1 μF (tested at 3.3 V ± 10%), C1 = 0.047 μF,
C2–C4 = 0.33 μF (tested at 5 V ± 10%), T
A
= T
MIN
to T
MAX
(unless otherwise noted)
PARAMETER MIN TYP
(1)
MAX UNIT
Maximum data rate R
L
= 3 kΩ, C
L
= 1000 pF, One driver switching 250 kbps
Time-to-exit powerdown |V
T_OUT
| > 3.7 V 100 μs
|t
PHL
– t
PLH
| Driver skew
(2)
100 ns
V
CC
= 3.3 V, C
L
= 150 pF to 1000 pF 6 30
T
A
= 25°C,
Transition-region
R
L
= 3 kΩ to 7 kΩ, V/μs
slew rate
C
L
= 150 pF to 2500 pF 4 30
Measured from 3 V
to –3 V or –3 V to 3 V
(1) Typical values are at V
CC
= V
L
= 3.3 V, T
A
= 25°C.
(2) Driver skew is measured at the driver zero crosspoint.
ESD Protection
PARAMETER TEST CONDITIONS TYP UNIT
Human-Body Model ±15
RIN, DOUT IEC 61000-4-2 Air-Gap Discharge ±15 kV
IEC 61000-4-2 Contact Discharge ±8
6 Submit Documentation Feedback Copyright © 2007–2011, Texas Instruments Incorporated
Product Folder Link(s): TRS3386E