User's Manual
Table Of Contents
- TRF7970A Evaluation Module (EVM)
- 1 TRF7970A EVM Description
- 2 Using the TRF7970A EVM With PC GUI
- 2.1 USB Driver
- 2.2 TRF7970A EVM GUI Startup
- 2.3 ISO15693 Tab
- 2.3.1 Inventory (Command Code 0x01)
- 2.3.2 Read Single Block (Command Code 0x20)
- 2.3.3 Write Single Block (Command Code 0x21)
- 2.3.4 Lock Block (Command Code 0x22)
- 2.3.5 Read Multiple Blocks (Command Code 0x23)
- 2.3.6 Write Multiple Blocks (Command Code 0x24)
- 2.3.7 Stay Quiet (Command Code 0x02)
- 2.3.8 Select (Command Code 0x25)
- 2.3.9 Reset to Ready (Command Code 0x26)
- 2.3.10 Write AFI (Command Code 0x27)
- 2.3.11 Lock AFI (Command Code 0x28)
- 2.3.12 Write DSFID (Command Code 0x29)
- 2.3.13 Lock DSFID (Command Code 0x2A)
- 2.3.14 Get System Information (Command Code 0x2B)
- 2.3.15 Get Multiple Block Security Status (Command Code 0x2C)
- 2.3.16 TI Custom Commands
- 2.4 ISO14443A Tab
- 2.5 ISO14443B Tab
- 2.6 FeliCa Tab
- 2.7 Find Tags Tab
- 2.8 Registers Tab
- 2.9 NFC-PP Tab
- 2.10 Test Tab
- 3 Abbreviations
- 4 References
www.ti.com
Using the TRF7970A EVM With PC GUI
2.9.5 NFC File Transfer
While still in Initiator and Target modes as described in Section 2.9.3, files can also be transferred. This is
done by selecting a file to be sent from the Initiator side and also a location (a file folder or directory) to
store the file on the Target. Any file format can be transferred (for example, .doc, .xls, .jpg, or .zip). In this
example, a firmware image file (.d43) is used.
1. Select file using the Browse button in the Initiator GUI.
2. Click Open (see Figure 35).
Figure 35. NFC File Transfer, Select File on Initiator
3. Select file folder or directory using the Browse button in the Target GUI (in this case, a folder called
NFC_File_Transfers was created for the demonstration).
4. Click Open (see Figure 36).
Figure 36. NFC File Transfer, Save File on Target
5. Click Send in the Initiator GUI (a status bar indicates activity) (see Figure 37).
6. When file transfer is complete, the status is reported in the Initiator protocol log window and the file is
available on the Target PC. The Target GUI also indicates activity.
39
SLOU321– August 2011 TRF7970A Evaluation Module (EVM)
Submit Documentation Feedback
Copyright © 2011, Texas Instruments Incorporated