Datasheet

CUT

Bend

LED+ LED-

AC2AC1

www.ti.com

PCB Cutouts

4.1.1 LED+

The LED+ is the positive output terminal of the EVM (banana jack) to the anode of the LED string.

4.1.2 LED–

The LED– is the negative output terminal of the EVM (banana jack) to the cathode of the LED string.

4.2 Input Connections

The input terminals of the EVM are described in Section 4.2.1 and Section 4.2.2.

4.2.1 AC1

AC1 is the AC voltage input terminal to the input power source. Differential to the AC2 terminal, the EVM

accepts a DC voltage, AC voltage or an electronic transformer as its input power source.

4.2.2 AC2

AC2 is the AC voltage input terminal to the input power source. Differential to the AC1 terminal, the EVM

accepts a DC voltage, AC voltage or an electronic transformer as its input power source.

5 PCB Cutouts

The EVM can fit into the plastic compartment of a generic MR16 by removing the outer frame of the PCB

as indicated in the following figure:

Figure 3. Removing Outer Frame of the TPS92560MR16BSTEVM

SLVU822–December 2012 User's Guide for TPS92560MR16BSTEVM

Submit Documentation Feedback