Datasheet

Test Setup www.ti.com
Figure 2. LED Board Schematic
5 Test Setup
5.1 Test Equipment
Voltage Source: 185-V
RMS
to 265-V
RMS
AC source.
Multimeters: Voltmeter for up to 20 V
DC
and an ammeter for up to 1 A
Output Load: Load provided or LED load that sinks 0.325 A
DC
and has a voltage drop between 14 V
DC
to
17 V
DC
Recommended Wire Gauge: 18 AWG
4
A 230-VAC TRIAC Dimmable 6-W LED Driver SLUU430C– July 2010–Revised May 2011
Submit Documentation Feedback
Copyright © 2010–2011, Texas Instruments Incorporated