Datasheet

www.ti.com

Bill of Material

7 Bill of Material

The BOM for this EVM is shown in Table 2

Table 2. Table 2. TPS7A8300EVM-209 BOM

RefDes Value Description Size Part Number MFR

C6, C7 0.01uF Capacitor, Ceramic Chip, 603 GRM188R71H103KA01D Murata

50V, ±10%, X7R

C2 1.0 uF Capacitor, Ceramic, Low 603 GRM188R71C105KA12D Murata

Inductance, 16V,X7R,10%

C1, C3, C4, C5 10uf Capacitor, Ceramic, 16V, 805 GRM21BR61C106KE15L Murata

[X5R], [10%l]

C8, C9 68uF Capacitor, Tantalum 16V, 6032 TPSC686K016R0200 AVX

J5,J6 ED555/2DS Connector, Male 2 Pole 3.5 6.5x6.5 mm ED555/2DS On Shore Tech

mm, 6A, 150V

J1, J2, J3, J4, J7 PEC02SAAN Header, Male 2-pin, 100mil 0.100 inch x 2 PECO2SAAN Sullins

spacing, (36-pin strip)

JP2 PEC06DAAN Header, Male 2x6 pin, 100mil 0.100 inch x 2X6 PEC06DAAN Sullins

spacing

JP1 PEC03SAAN Header, Male 3-pin, 100mil 0.100 inch x 3 PEC03SAAN Sullins

spacing,

R3, R6 0 Resistor, Chip, 1/10W, 1% 603 CRCW06030000Z0EA Vishay

R4, R5 10k Resistor, Chip, 1/10W, 1% 603 CRCW060310K0FKEA Vishay

R2 51.1K Resistor, Chip, 1/10W, 1% 603 CRCW060351K1FKEA STD

R1 604K Resistor, Chip, 1/10W, 1% 603 CRCW0603604KFKEA STD

TP1. TP2, TP3, TP4, TP5 5010 Test Point, Red, Thru Hole 0.125 x 0.125 inch 5010 Keystone

U1 TPS7A8300RGW IC, 2 A, LDO Voltage QFN-20 TPS7A8300RGW TI

Regulator for High Speed

Communication Systems

-- PCB, 2.5 In x 1.6 In x 0.062 PWR209A Any

JP1, JP2 Shunt, Black 100-mil 929950-00 3M

1. These assemblies are ESD sensitive, observe ESD precautions.

2. These assemblies must be clean and free from flux and all contaminants. Use of no-clean flux is not acceptable.

3. These assemblies must comply with workmanship standards IPC-A-610 Class 2.

4. Ref designators marked with an asterisk ('**') cannot be substituted. All other components can be substituted with equivalent MFG's components.

SLVU919–June 2013 TPS7A8300EVM-209 Evaluation Module

Submit Documentation Feedback