Datasheet

www.ti.com

Schematic and Bill of Materials

4 Schematic and Bill of Materials

4.1 Schematic

Figure 5. TPS7A6201QKTT EVM Schematic

4.2 Bill of Materials

Table 2. TPS7A6201QKTT EVM Bill of Materials

COUNT REF DES DESCRIPTION SIZE MFR PART NUMBER

1 C1 Capacitor, electrolytic, 22uF, 50V 6.3mm x 5.8mm Panasonic EEV-FK1H220P

2 C2, C3 Capacitor, ceramic, 0.1uF, 50V, 10% 603 STD STD

1 C4 Capacitor, ceramic, 10uF, 16V, 10% 1206 STD STD

1 D1 Diode, Schottky, 1A, 60V SMA Diodes B160-13-F

8 EN, FB, GND (x3), Test point, 52-mil 0.052 Kobiconn 151-103-RC

VBAT, VIN, VOUT

1 EN Header, 6-pin, 100-mil spacing, (36-pin strip) 0.100 x 3 Sullins PEC06DAAN

1 EN Connector jumper, shorting, 100-mil spacing 0.1 Sullins SPC02SYAN

1 R1 Resistor, chip, 100-k , 1/10W, 1% 603 STD STD

1 R2 Resistor, chip, 32.4-k , 1/10W, 1% 603 STD STD

1 U1 IC, TPS7A6201QKTTQ1 TI TPS7A6201QKTTQ1

- PCB, 2-inch x 1.5-inch x 0.062 Any TPS7A6201, REV A

SLVU458–April 2011 TPS7A6201QKTT EVM

Submit Documentation Feedback