Datasheet

Schematic and Bill of Materials

www.ti.com

6 Schematic and Bill of Materials

This section provides the TPS7xx01DRBEVM schematic and bill of materials.

6.1 Schematic

The schematic for this EVM is appended to this document.

6.2 Bill of Materials

Table 4 lists the bill of materials for the TPS7xx01DRBEVM.

Table 4. TPS7xx01DRBEVM Bill of Materials

(1)(2)(3)

001 002 003 RefDes Value Description Size Part Number MFR

1 1 1 C1 10µF Capacitor, Ceramic, Low Inductance, 6.3V, X5R, 20% 0603 STD STD

1 1 1 C2 33pF Capacitor, Ceramic, Low Inductance, 50V, COG, 5% 0603 STD STD

1 1 1 C3 20pF Capacitor, Ceramic, Low Inductance, 50V, COG, 5% 0603 STD STD

1 1 1 C4 4.7µF Capacitor, Ceramic, Low Inductance, 6.3V, X5R, 20% 0603 STD STD

1 1 1 C5 15pF Capacitor, Ceramic, Low Inductance, 50V, COG, 5% 0603 STD STD

1 1 1 C7 18pF Capacitor, Ceramic, Low Inductance, 50V, COG, 5% 0603 STD STD

J1, J2,

4 4 4 PEC02SAAN Header, Male 2-pin, 100mil spacing 0.100" PEC02SAAN Sullins

J3, J4

1 1 1 J5 PEC03SAAN Header, Male 3-pin, 100mil spacing 0.100" PEC03SAAN Sullins

1 1 1 J6 PEC04DAAN Header, Male 2x4-pin, 100mil spacing 0.100" PEC04DAAN Sullins

1 1 1 R1 30.1kΩ Resistor, Chip, 1/16W, 1% 0603 STD STD

1 1 1 R2 14.0kΩ Resistor, Chip, 1/16W, 1% 0603 STD STD

1 1 1 R3 31.6kΩ Resistor, Chip, 1/16W, 1% 0603 STD STD

1 1 1 R5 51.1kΩ Resistor, Chip, 1/16W, 1% 0603 STD STD

1 1 1 R7 39.2kΩ Resistor, Chip, 1/16W, 1% 0603 STD STD

1 — — U1 TPS78601DRB IC, LDO Linear Regulator Ultralow-Noise High PSRR Fast RF SON-8 TPS78601DRB TI

— 1 — U1 TPS79501DRB IC, LDO Linear Regulator Ultralow-Noise High PSRR Fast RF SON-8 TPS79501DRB TI

— — 1 U1 TPS79601DRB IC, LDO Linear Regulator Ultralow-Noise High PSRR Fast RF SON-8 TPS79601DRB TI

1 1 1 — — PCB, 2.00 In x 2.00 In x 0.062 In — HPS497 Any

2 2 2 — — Shunt, 100-mil, Black — 929950-00 3M

(1)

These assemblies are ESD sensitive. ESD precautions shall be observed.

(2)

These assemblies must be clean and free from flux and all contaminants. Use of no-clean flux is not acceptable.

(3)

These assemblies must comply with workmanship standards IPC-A-610 Class 2.

TPS78601/TPS79501/TPS79601DRB Evaluation Module SBVU016–June 2010