Datasheet

Bill of Materials
1-4
Introduction
1.4 Bill of Materials
Table 1–2 lists materials required for the SLVP191
Table 1–1.SLVP191 Bill of Materials
79301 79328
Ref
Des
Description Size MFR Part Number
1 1 C1 Capacitor, ceramic, 1.0 µF, 6.3 V,
10%
603 Murata GRM39X7R105K6.3
1 1 C2 Capacitor, ceramic, 0.0047 µF, . . .
25 V, X7R, 10%
603 Murata GRM39X7R472K25
1 1 C3 Capacitor, ceramic, 4.7 µF, 16 V,
X5R, 15%
1206 Murata GRM42–6X5R475K16
1 C4 Capacitor, ceramic, 100 pF, 50 V,
C0G, 5%
603 Murata GRM39C0G101J50
0
Not used
1 1 J1 Clip, surface-mount, 0.040 board,
0.090 standoff
0.100” NAS Interplex CA26DA–D36W–0FC
1 1 J2 Clip, surface-mount, 0.040 board,
0.090 standoff
0.100” NAS Interplex CA26DA–D36W–0FC
1 1 J3 Clip, surface-mount, 0.040 board,
0.090 standoff
0.100” NAS Interplex CA26DA–D36W–0FC
1 1 J4 Clip, surface-mount, 0.040 board,
0.090 standoff
0.100” NAS Interplex CA26DA–D36W–0FC
1 1 R1 Resistor, chip, 10 kΩ, 1/16 W, 1% 603 Std Std
0 0 R2 Not used
1 R3 Resistor, chip, 30.1 kΩ,, 1/16 W,
1%
603 Std Std
0 Not used
1 R4 Resistor, chip, 6.8 kΩ,, 1/16 W, 1% 603 Std Std
0 Not used
1 U1 IC, high PSRR, low noise LDO, adj
output, 100 mA
SOT23–6 TI TPS79301DBV
1 IC, high PSRR, low noise LDO,
2.8 V, 200 mA
SOT23–5 TI TPS79328DBV
1 1 PCB, 0.705 in × 0.570 in × 0.031 Any SLVP191