Datasheet

Schematic
4-2
4.1 Schematic
Figure 4–1. Schematic
+ ++
4.2 Bill of Materials
Table 4–1.Bill of Materials
Qty Ref Des Description Size Mfr Part Number
0 C1 Open 805
1 C2 Capacitor, POSCAP, 100 µF, 10 V,
55 mΩ, 20%
7343 (D) Sanyo 10TPB100M
1 C3 Capacitor, ceramic, 2.2 µF,
6.3 V, X5R, 10%
805 Murata GRM21BR60J225KC01
1 C4 Capacitor, ceramic, 10 µF, 6.3 V,
X5R, 20%
1210 Murata GRM31CR60J106KC01
0 C5 Open 7343 (D)
0 C6 Open 6032 (C)
1 C7 Capacitor, Ceramic, 4700 pF, 25 V,
X7R, 10%
603 Murata GRM188R71E472KA01
4 J1, J3, J4,
J5
Connector, mini banana jack,
uninsulated, 4-mm inside diameter
0.300 OD Farnell B0 10
2 J2, J6 Header, 3 pin, 5-mm spacing 0.197 x 3” OST ED1661
1 JP1 Header, 2 pin, 100-mil spacing,
(36-pin strip)
0.100 x 2” Sullins PTC36SAAN
1 R1 Resistor, chip, 100 kΩ, 1/16 W, 1% 603 Std Std
1 R2 Resistor, chip, 100 Ω, 1/16 W, 1% 603 Std Std
0 R3 Open 603
0 R4 Open 603
0 R5 Open 603
2 TP1, TP3 Test point, red, 1 mm 0.038” Farnell 240–345
1 TP2 Test point, black, 1 mm 0.038” Farnell 240–333
1 U1 IC, LDO Regulator, 3.3 V,
1.5 A, low noise, high PSRR
TO-263 TI TPS78633KTT
1 PCB, 2.055” x 1.85 “ x 0.062” Any SLVP207
1 Shunt, black, 100 mm 0.100 3M 929950–00