User manual

Bill of Materials

www.ti.com

4.2 Bill of Materials

Table 4-1 is the bill of materials for the TPS75105DSKEVM-529 EVM.

Table 4-1. Bill of Materials

Count RefDes Value Description Size Part Number MFR

1 C1 1 µF Capacitor, ceramic, 16-V, 0603 STD STD

X5R, 10%

4 D1A1, SML-LX2832UWC-TR Diode, LED, white, 30-mA 1210 SML-LX2832UWC-TR Lumex

D1B1,

D2A1, D2B1

2 J1, J2 PEC02SAAN Header, 2-pin, 100-mil 0.1 inch PEC02SAAN Sullins

spacing (2.54 mm) × 2

2 JP1, JP2 PEC03SAAN Header, 3-pin, 100-mil 0.1 inch PEC03SAAN Sullins

spacing (2.54 mm) × 3

4 JP3, JP4, PEC02SAAN Header, 2-pin, 100-mil 0.1 inch PEC02SAAN Sullins

JP5, JP6 spacing (2.54 mm) × 2

0 R1 Open Resistor, chip, 1/16W, 1% 0603 Open STD

1 U1 TPS75105DSK IC, LDO, two-bank LED WSON TPS75105DSK TI

driver with PWM

brightness control

6 Shunt, 100-mil (2.54-mm), 0.1 (2.54) 929950-00 3M

black

1 PCB, 1.8-inch × 1.2-inch HPA529 Any

× 0.062-inch (45.7-mm ×

30.5-mm × 1.57-mm)

NOTES:

1. These assemblies are ESD sensitive; ESD precautions must be observed.

2. These assemblies must be clean and free from flux and all contaminants. Use of dirty flux is not

acceptable.

3. These assemblies must comply with workmanship standards IPC-A-610 Class 2.

Schematic and Bill of Materials SLVU334–August 2009

Submit Documentation Feedback