Datasheet

www.ti.com

Schematic and Bill of Materials

7.2 Parts List

Table 2 lists the bill of materials for the TPS75005EVM.

Table 2. TPS75005EVM Bill of Materials

(1)(2)(3)

Count RefDes Value Description Size Part Number MFR

0 C1 Open Capacitor, tantalum, 10 V, 20% 6032 Std Std

3 C2, C3, C8 10 µF Capacitor, ceramic, 10 V, X5R, 20% 0805 Std Std

4 C4 to C7 1 nF Capacitor, ceramic, 10 V, X5R, 10% 0603 Std Std

7 J1 to J7 PEC02SAAN Header, male 2-pin, 100-mil spacing, 0.100 inch x 2 PEC02SAAN Sullins

1 JP1 PEC03SAAN Header, male 3-pin, 100-mil spacing, 0.100 inch x 3 PEC03SAAN Sullins

2 JP2-3 PEC02SAAN Header, male 2-pin, 100-mil spacing, 0.100 inch x 2 PEC02SAAN Sullins

1 R1 10.0 kΩ Resistor, chip, 1/16W, 1% 0603 Std Std

1 R2 10.2 kΩ Resistor, chip, 1/16W, 1% 0603 Std Std

5 R3 to R7 100 kΩ Resistor, chip, 1/16W, 1% 0603 Std Std

0 R8 Open Resistor, chip, 1/16W, 1% 0603 Std Std

5 TP1 to TP5 5000 Test point, red, through-hole color 0.100 x 0.100 5000 Keystone

keyed inch

1 U1 TPS75005RGW IC, dual 500-mA LDO and Triple QFN-20 TPS75005RGW TI

voltage rail monitor

3 -- Shunt, 100-mil, black 0.100 929950-00 3M

1 -- PCB, 1.7 in x 2.3 in x 0.062 in PWR023 Any

(1)

These assemblies are ESD sensitive. ESD precautions shall be observed.

(2)

These assemblies must be clean and free from flux and all contaminants. Use of no-clean flux is not acceptable.

(3)

These assemblies must comply with workmanship standards IPC-A-610 Class 2.

SBVU019A– October 2011– Revised October 2011 TPS75005EVM-023

Submit Documentation Feedback