Datasheet

6.2 Bill of Materials
Schematic and Bill of Materials www.ti.com
Table 1. TPS735xxEVM-276 Bill of Materials
-001 -002 RefDes Value Description Size Part Number MFR
1 1 C1 1.0 µ F Capacitor, Ceramic, 10V, X5R, 10% 0603 C1608X5R1A105K TDK
1 1 C2 2.2 µ F Capacitor, Ceramic, 10V, X5R, 10% 0603 Std Std
1 0 C3 22 pF Capacitor, Ceramic, 16V, X5R, 10% 0603 Std Std
0 0 C3 Open
0 1 C4 0.01 µ F Capacitor, Ceramic, 16V, X5R, 10% 0603 Std Std
4 4 J1–J4 PTC36SAAN Header, Male 2-pin, 100mil spacing, 0.100 inch × 2 PTC36SAAN Sullins
(36-pin strip)
1 1 JP1 PTC36SAAN Header, 3-pin, 100mil spacing, (36-pin 0.100 inch × 3 PTC36SAAN Sullins
strip)
1 0 R1 56.2K Resistor, Chip, 1/16W, 1% 0603 Std Std
0 0 R1 Open
1 0 R2 110K Resistor, Chip, 1/16W, 1% 0603 Std Std
1 0 U1 TPS73501DRB IC, 500mA, Low Quiescent Current, SON-8 TPS73501DRB TI
Ultra-Low Noise, High PSRR LDO,
adjustable
0 1 U1 TPS73525DRB IC, 500mA, Low Quiescent Current, SON-8 TPS73525DRB TI
Ultra-Low Noise, High PSRR LDO, 2.5V
1 1 HPA276 PCB, 2.0" × 2.5" × 0.062" HPA276 Any
1 1 — Shunt, 100 mil, Black 0.100 929950-00 3M
Notes: 1. These assemblies are ESD sensitive, ESD precautions shall be observed.
2. These assemblies must be clean and free from flux and all contaminants. Use of no clean flux is not acceptable.
3. These assemblies must comply with workmanship standards IPC-A-610 Class 2.
4. Ref designators marked with an asterisk ('**') cannot be substituted. All other components can be substituted with equivalent
MFG's components.
TPS735xxEVM-276 6 SLVU256A – August 2008 – Revised November 2008
Submit Documentation Feedback