Datasheet

Schematic and Bill of Materials

www.ti.com

6 Schematic and Bill of Materials

This chapter provides the TPS727xxYFFEVM-407 schematic and bill of materials.

6.1 Schematic

Figure 5. TPS727xxYFFEVM-407 Schematic

6.2 Bill of Materials

Table 1. HPA407A Bill of Materials

-001 -002 -003 RefDes Value Description Size Part Number MFR

2 2 2 C1, C2 1.0 µF Capacitor, Ceramic, 6.3V, X5R, 20%. 0603 STD Any

4 4 4 J1–J4 PEC02SAAN Header, 2-pin, 100mil spacing 0.100 inch × 2 PEC02SAAN Sullins

1 1 1 JP1 PEC03SAAN Header, 3-pin, 100mil spacing 0.100 inch × 3 PEC03SAAN Sullins

1 0 0 U1 TPS72715YFF IC, 200mA Ultra-low IQ LDO with Auto-Low Power DSBGA TPS72715YFF TI

Mode

0 1 0 U1 TPS72718YFF IC, 200mA Ultra-low IQ LDO with Auto-Low Power DSBGA TPS72718YFF TI

Mode

0 0 1 U1 TPS72728YFF IC, 200mA Ultra-low IQ LDO with Auto-Low Power DSBGA TPS72728YFF TI

Mode

1 1 1 N/A Shunt, 100 mil, Black 0.100 929950-00 3M

1 1 1 N/A PCB, FR-4, 2-Layer, SMOBC, HPA407** Any

0.903" x 1.050" x 0.062"

Notes: 1 These assemblies are ESD sensitive, ESD precautions shall be observed.

2. These assemblies must be clean and free from flux and all contaminants.

Use of no clean flux is not acceptable.

3. These assemblies must comply with workmanship standards IPC-A-610 Class 2.

4. Ref designators marked with an asterisk ('**') cannot be substituted.

All other components can be substituted with equivalent MFG's components.

TPS727xxYFF EVM SLVU323–February 2010

Submit Documentation Feedback