Datasheet
1 Introduction
User's Guide
SLVU200 – April 2007
TPS718xxEVM-213 and TPS719xxEVM-213
This user’s guide describes the characteristics, operation, and use of the Texas
Instruments TPS718xxEVM-213 and TPS719xxEVM-213 evaluation module (EVM).
Each TPS718xx and TPS719xx low quiescent current, wide bandwidth, dual
low-dropout linear regulator is capable of supplying up to 200 mA of current per output.
This user’s guide includes setup instructions, a schematic diagram, a bill of materials
(BOM), and PCB layout drawings for the evaluation module.
Contents
1 Introduction .......................................................................................... 1
2 I/O Connectors, Setup, and Operation ........................................................... 2
3 Board Layout ........................................................................................ 3
4 Schematic and Bill of Materials ................................................................... 4
5 Related Documentation From Texas Instruments .............................................. 6
List of Figures
1 Assembly Layer ..................................................................................... 3
2 Top Layer Routing .................................................................................. 4
3 Bottom Layer Routing .............................................................................. 4
4 TPS718xxEVM-213 and TPS719xxEVM-213 Schematic ..................................... 5
List of Tables
1 Minimum and Maximum Input Voltage ........................................................... 3
2 HPA213 Bill of Materials ........................................................................... 6
Texas Instruments' TPS718xxEVM-213 and TPS719xxEVM-213 evaluation module (EVM) helps
designers evaluate the operation and performance of the TPS718xx and TPS719xx family of linear
regulators. These are low quiescent current, wide bandwidth, low-dropout linear regulators in a SC70
package.
This EVM demonstrates the TPS71933-28, which provides up to 200 mA from each of its 3.3-V and 2.8-V
regulated output pins. Other fixed-output voltage versions of the TPS718xx and TPS719xx families can be
evaluated by replacing the TPS71933-28 on the EVM as these parts have the same pinout. See the
TPS718xx and TPS719xx data sheet (SBVS088 ) for the various fixed-output voltage options available.
SLVU200 – April 2007 TPS718xxEVM-213 and TPS719xxEVM-213 1
Submit Documentation Feedback