Datasheet

Bill of Materials
1-3
Introduction
1.4 Bill of Materials
Table 1–1 lists materials required for the TPS71533EVM.
Table 1–1.TPS71533EVM Bill of Materials
Qty Ref Des Description Size MFR Part Number
1 C1 Capacitor, ceramic, 0.1 µF, 25 V, X7R, 10% 603 Murata GRM188R71E104KA01
1 C2 Capacitor, ceramic, 1-µF, 6.3 V, X5R, 10% 603 Murata GRM188R60J105KA01
4 J1–J4 Clip, surface-mount, 0.040 board, 0.090
standoff
0.100” NAS Interplex CA26DA-D36W-0FC
0 R1 Not used 603
1 U1 IC, regulator, LDO, micropower SOP-5 (DCK) TI TPS71533DCK
1.5 Board Layout
Figures 1–2 through 1-4 show the board layout for the SLVP199 PCB used for
the TPS71533EVM.
Figure 1–2. Top Layer