Datasheet

www.ti.com Test Results
4 Test Results
This section provides typical performance waveforms for the EVM. Actual performance data is affected by
measurement techniques and environmental variables; therefore, these curves are presented for
reference and may differ from actual results obtained.
4.1 Turn-on Waveform
Figure 1 shows the turn-on characteristic, where 5 V is applied to V
IN
. The output drives a 22-Ω load (full
load).
Figure 1. Turn-on Waveforms Into Full Load (22 Ω) of the TPS70933EVM-110
3
SLVU689A–June 2011–Revised September 2012 TPS709xxEVM-110 Evaluation Module
Submit Documentation Feedback
Copyright © 2011–2012, Texas Instruments Incorporated