Datasheet

2-1
EVM Adjustments and Test Points
EVM Adjustments and Test Points
This chapter explains the following EVM adjustment modes:
Adjustment by switch and jumper
Adjustment through changing components
Figure 2–1 shows the locations of the adjustment points on the board.
Topic Page
2.1 Adjustment by Switch and Jumpers 2–2. . . . . . . . . . . . . . . . . . . . . . . . . . . .
2.2 Adjustment Through Component Changes 2–3. . . . . . . . . . . . . . . . . . . . . .
2.3 Test Setup 2–3. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Chapter 2