Datasheet

TPS65950
SWCS032E–OCTOBER 2008–REVISED JANUARY 2011 www.ti.com
– 3-pin LS/FS serial mode (DAT_SE0)
– 4-pin LS/FS serial mode (VP_VM)
• CEA-936A: Mini-USB Analog Carkit Interface Specification (hereafter referred to as the CEA-936A
specification):
– 5-pin CEA mini-USB analog carkit interface
– UART signaling
– Audio (mono/stereo) signaling
– UART transactions during audio signaling
– Basic and smart 4-wire/5-wire carkit, chargers, and accessories
– ID CEA resistor comparators
• MCPC ME-UART GL-006 Specification (hereafter referred to as the MCPC ME-UART specification):
– 11-pin MCPC Association of Radio Industries and Businesses (ARIB)-USBi (USB interface
standard) analog carkit interface
– UART signaling
• UTMI+ Low Pin Interface Specification (hereafter referred to as the ULPI specification):
– 12-pin ULPI with 8-pin parallel data for USB signaling and register access
– 60-MHz clock generation
– Register mapping
7.2 USB Transceiver
Figure 7-2 is an application schematic of the USB system.
100 USB HS 2.0 OTG Transceiver Copyright © 2008–2011, Texas Instruments Incorporated
Submit Documentation Feedback
Product Folder Link(s): TPS65950