Datasheet

TPS65930/TPS65920
SWCS037G–MAY 2008– REVISED APRIL 2011 www.ti.com
Table 2-1. Ball Characteristics (continued)
PU[6] (kΩ) PD[6] (kΩ) Buffer
TPS65920 TPS65930 Pin A/D Reference Level
Type[4] Strength
Ball[1] Ball[1] Name[2] [3] RL[5]
Min Typ Max Min Typ Max
(mA)[7]
GPIO1 D I/O IO_1P8 2
E7 E7 75 100 202 59 100 144
JTAG.TMS D I IO_1P8
GPIO2 D I/O IO_1P8 2
P2 P2 156 220 450 59 100 144
TEST1 D I/O IO_1P8 2
GPIO15 D I/O IO_1P8 2
P13 P13 156 220 450 59 100 144
TEST2 D I/O IO_1P8 2
GPIO6 D I/O IO_1P8 2
L5 L5 PWM0 D O IO_1P8 75 100 202 59 100 144 4
TEST3 D I/O IO_1P8 2
GPIO7 D I/O IO_1P8 2
VIBRA.SYNC D I IO_1P8
J7 J7 75 100 202 59 100 144
PWM1 D O IO_1P8 4
TEST4 D I/O IO_1P8 2
D8 D8 SYSEN D Open drain/I IO_1P8 4.7 7.35 10 2
A4 A4 CLKEN D O IO_1P8 2
B13 B13 CLKREQ D I IO_1P8 60 100 146
C10 C10 INT1 D O IO_1P8 2
C8 C8 NRESPWRON D O IO_1P8 2
B9 B9 NRESWARM D I IO_1P8 2
D10 D10 PWRON D I VBAT
G5 G5 NSLEEP1 D I IO_1P8
E10 E10 CLK256FS
(1)
D O IO_1P8 2
E4 E4 VMODE1 D I IO_1P8
E8 E8 BOOT0 A/D I/O VBAT
D7 D7 BOOT1 A/D I/O VBAT
B8 B8 REGEN D Open drain VBAT 5.5 8 12 2
H4 H4 MSECURE D I IO_1P8
L13 L13 VREF A Power VREF
Power
K13 K13 AGND A ground GND
(GND)
N.C.
B3 B3
I2C.SR.SDA D I/O IO_1P8 2.5 3.4 12
VMODE2 D I IO_1P8 2
C5 C5
I2C.SR.SCL D I/O IO_1P8 2.5 3.4 12
C3 C3 I2C.CNTL.SDA D I/O IO_1P8 2.5 3.4 12
B4 B4 I2C.CNTL.SCL D I IO_1P8 2.5 3.4 12
See
(2)
H3 I2S.CLK D I/O IO_1P8 2
See
(2)
K2 I2S.SYNC D I/O IO_1P8 2
See
(2)
K4 I2S.DIN D I IO_1P8 2
See
(2)
K3 I2S.DOUT D O IO_1P8 2
See
(2)
D1 MIC.MAIN.P A I MICBIAS1.OUT
See
(2)
E1 MIC.MAIN.M A I MICBIAS1.OUT
A10 A10 VBAT.RIGHT A Power VBAT
PreDriv.LEFT A O VINTANA2.OUT
See
(2)
A7
VMID A Power VINTANA2.OUT
PreDriv.RIGHT A O VINTANA2.OUT
See
(2)
A8
ADCIN7 A I VINTANA2.OUT
See
(2)
G1 AUXR A I VINTANA2.OUT
MICBIAS1.OUT A Power VINTANA2.OUT
See
(2)
E2
VMIC1.OUT A Power VINTANA2.OUT
See
(2)
D2 MICBIAS.GND Power GND GND
(1) To avoid reflection on this pin as a result of impedance mismatch, a serial resistance of 33 Ω must be added. This clock output is
available in TPS65920 also. Can be used as a clock source, if required.
(2) Balls A7, A8, D1, D2, E1, E2, G1, H3, K2, K3, and K4 are present on TPS65920 package. However, there is no function associated with
these pins. These can be left floating.
14 Terminal Description Copyright © 2008–2011, Texas Instruments Incorporated
Submit Documentation Feedback
focus.ti.com: TPS65930/TPS65920