Datasheet

TPS659110, TPS659112, TPS659113, TPS659116
SWCS049L –JUNE 2010–REVISED MARCH 2014 www.ti.com
Table 100. Detailed Revision History (continued)
Version Literature Number Date Notes
G SWCS049G October 2011 See
(8)
.
H SWCS049H May 2012 See
(9)
I SWCS049I June 2012 See
(10)
J SWCS049J September 2012 See
(11)
K SWCS049K December 2012 See
(12)
L SWCS049L February 2014 See
(13)
(8) TPS65911 Data Manual, SWCS049G - Version G:
(a) Update LDO1 And LDO2, LDO3 And LDO4, LDO5, LDO6, LDO7, And LDO8:
(a) Update turn-on time
(b) Update DC line regulation
(b) Update VIO SMPS
(a) Update rated output current I
OUTmax
.
(c) Update VDD1 SMPS and VDD2 SMPS
(a) Update rated output current I
OUTmax
.
(b) Update DC line regulation
(c) Update DC load regulation
(d) Update Digital I/O Voltage Electrical Characteristics
(a) Update Related Open-Drain I/Os: GPIO2, GPIO7
(e) Update VDDCtrl SMPS
(a) Add Supply Current, Internal Reference Voltage, Output discharge, Output drivers, Boot strap switch, Duty and frequency control,
softstart, current sense protection, UVLO, and thermal shutdown.
(b) Remove DC line regulation, DC load regulation, Transient load regulation, Overshoot/undershoot, Rated output I
OUTmax
, and
Conversion efficiency.
(c) VIO SMPS and VDD2 SMPS - Remove Iout = 1500 mA value
(d) Table 10 - Update VIO, VDD1, VDD2, and VDDCtrl
(e) Figure 1 - Update VIO, VDD1, and VDD2
(9) TPS65911 Data Manual, SWCS049H - Version H:
(a) Update VIO SMPS
(a) Update Rated output current description- add ILMAX bit configuration
(b) Update PMOS current limit (high-side) description
(c) Update NMOS current limit (high-side) description
(b) Update Figure 5 - CLK32KOUT out pin name (fixed typo)
(c) Update Figure 12
(d) Update Table 44, VIO_REG - Update ILMAX description
(e) Update Table 45, VDD1_REG - Update ILMAX and and TSTEP field numbers and VGAIN_SEL description
(f) Update Table 48, VDD2_REG - Update VGAIN_SEL description; align bit field numbering
(g) Update Table 52, VDDCRTL_OP_REG - Update SEL description
(h) Update Table 53, VDDCRTL_SR_REG - Update SEL description
(i) Update Table 5 - t
dbPWRONF
: PWRON falling-edge debouncing delay - Update unit of measure
(j) Update Table 6 - Replace tACT2SLP by tACT2SLPCK32K
(k) Update Figure 8 - Replace tdONVMBHI by tdONPWHOLD
(l) Update Table 7 - Replace tdONVMBHI by tdONPWHOLD
(m) Update PWRON - Replace 100 µs by 100 ms
(n) Update Table 65 - Add Bit 0,1, and 3 : TURN OFF RESET to the description
(o) Update Table 66 - Add TSLOT_LENGTH: TURN OFF RESET to the description
(p) Update Table 81 - Add footnote
(10) TPS65911 Data Manual, SWCS049I - Version I:
(a) Update Absolute Maximum Ratings - Add VDDIO
(b) Update Recommended Operating Conditions - Add VDDIO
(c) Update I/O Pullup And Pulldown Characteristics - Remove PWRDN
(d) Update Table 3 - Remove PD from PWRDN
(11) TPS65911 Data Manual, SWCS049J - Version J:
(a) Update Recommended Operating Conditions: Fix typo on HDRST pin
(b) Update Appendix A: Functional Registers: Update full reset:
(a) Full reset: All digital logic of device is reset.
(a) Caused by POR (power on reset) when VCC7 < VBNPR and BB < VBNPR
(12) TPS65911 Data Manual, SWCS049K - Version K
(a) Update Table 12 - Changed VMBCH_REG to EEPROM
(13) TPS65911 Data Manual, SWCS049L - Version L
(a) Update Table 2 - Added TPS659116
114 Submit Documentation Feedback Copyright © 2010–2014, Texas Instruments Incorporated
Product Folder Links: TPS659110 TPS659112 TPS659113 TPS659116