Datasheet

TPS659110, TPS659112, TPS659113, TPS659116

SWCS049L –JUNE 2010–REVISED MARCH 2014

www.ti.com

5.1 Absolute Maximum Ratings

Stresses beyond those listed under below may cause permanent damage to the device. These are stress ratings only and

functional operation of the device at these or any other conditions beyond those indicated below are not implied. Exposure to

absolute-maximum-rated conditions for extended periods may affect device reliability.

The absolute maximum ratings for the TPS65911 device, over operating free-air temperature range (unless otherwise noted),

are listed below.

PARAMETER MIN MAX UNIT

Voltage range on pins or balls VCC1, VCC2, VCCIO, VCC3, VCC4,

–0.3 7 V

VCC5, VCC7, VBACKUP, V5IN, TRIP

Voltage range on pins or balls VCC6 –0.3 3.6 V

Voltage range on pins or balls VDDIO –0.3 3.6 V

Voltage range on pins or balls VBST –0.3 37 V

Voltage range on pins or balls SW –5 30 V

Voltage range on pins or balls SW1, SW2, SWIO –0.3 7 V

Voltage range on pins or balls VFB1,VFB2,VFBIO –0.3 3.6 V

Voltage range on pins or balls VOUT, VFB –0.3 7 V

Voltage range on pins or balls OSC32KIN,OSC32KOUT, BOOT1 –0.3 VRTCMAX + 0.3 V

Voltage range on pins or balls SDA_SDI, SCL_SCK, EN2, EN1,

–0.3 VDDIOMAX + 0.3 V

SLEEP, INT1, CLK32KOUT, NRESPWRON

Voltage range on pins or balls PWRON –0.3 7 V

Voltage range on pins or balls PWRHOLD, GPIO0 –0.3 7 V

Voltage range on balls GPIO1, GPIO2, GPIO3, GPIO4, GPIO5,

–0.3 7 V

GPIO6, GPIO7, GPIO8

(1)

Voltage range on balls HDRST –0.3 7 V

Voltage range on balls NRESPWRON2

(1)

–0.3 7 V

Voltage range on ball PWRDN

(2)

–0.3 7 V

Voltage range on ball VCCS –0.3 7 V

Functional junction temperature range –45 150 °C

Peak output current on all other terminals than power resources –5.0 5.0 mA

(1) I/O supplied from VRTC but which can be driven from VCC7 or to VCC7 voltage level.

(2) Input supplied from VRTC but can be driven from VCC7 voltage level.

Product Folder Links: TPS659110 TPS659112 TPS659113 TPS659116