Datasheet

www.ti.com

GUI Information

6 GUI Information

The GUI accompanying this device is fairly simple. It runs on a Windows PC. Ensure that your machine

supports Microsoft .NET Framework 3.5.

6.1 Installation Instructions:

To install the GUI follow these steps:

1. Download from site/Insert CD (based on how we package the GUI).

2. Create a new folder or unzip into any appropriate windows folder. If it is an exe, then select the

location. The default is C:/xyz/.

6.2 Know the Files

GUI software consists of the following files:

• DLL

• EXE

• XML

The GUI can be opened by clicking the MS Installer, TPS65910.msi file. The .xml file is the main file that

contains all the device registers. The registers in this file are categorized in blocks according to the

functions. The .xml file also specifies the slave I

C address for the device.

6.3 GUI Description

GUI windows are divided into the following sections:

6.3.1 Register Properties

The following blocks are on the GUI on the left-side pane under Register Properties:

• Time and Calendar Registers

• RTC Registers

• Back-up Registers

• DCDC Control Registers

• LDO Control Registers

• Device Control Registers

• Interrupts and GPIO Registers

Figure 2 shows a sample snapshot of the GUI.

Each block can be selected independently so that it appears on the main GUI window. Each register

instance appears in a separate block. See Figure 3.

The user can write to the registers through the I

C bus. Each bit in the 8-bit register can be written

independently or the complete register can be written using an 8-bit hexadecimal value in the Value field.

Individual bits can be toggled either by selecting the drop-down menu or by double-clicking the field.

SWCU065F–March 2010–Revised April 2013 Introduction

Submit Documentation Feedback