Datasheet

GUI Information

www.ti.com

Figure 4. Register Map View

6.3.3 Modes

This section is used for executing multiple register writes in a single step. For example, to configure the

device in SLEEP state, multiple bits must be configured for SMPS and LDO supplies. An example is

provided in the .xml file that comes with the GUI package.

Users can create their own sequences in the .xml file.

6.3.4 I/O writes

Three control signals for the TPS65910 (SLEEP, PWRHOLD and GPIO) can be altered using the GUI. To

select these signals, the user can use the I/O Flag tab on the menu bar. For mapping of the I/O lines, refer

to the TPS65910 schematic and datasheet for the GPIO-to-USB adapter at

http://focus.ti.com/docs/toolsw/folders/print/usb-to-gpio.html.

Introduction SWCU065F–March 2010–Revised April 2013

Submit Documentation Feedback