Datasheet

TPS65910, TPS65910A, TPS65910A3, TPS659101, TPS659102, TPS659103
TPS659104, TPS659105, TPS659106, TPS659107, TPS659108, TPS659109
SWCS046T –MARCH 2010–REVISED SEPTEMBER 2013 www.ti.com
Table 80. REVISION HISTORY
VERSION DATE NOTES
* 03/2010 See
(1)
.
A 05/2010 See
(2)
.
B 06/2010 See
(3)
.
C 06/2010 See
(4)
.
D 11/2010 See
(5)
.
E 01/2011 See
(6)
.
F 01/2011 See
(7)
.
G 05/2011 See
(8)
.
H 06/2011 See
(9)
.
I 07/2011 See
(10)
J 10/2011 See
(11)
K 10/2011 See
(12)
L 01/2012 See
(13)
M 03/2012 See
(14)
N 04/2012 See
(15)
O 06/2012 See
(16)
P 09/2012 See
(17)
Q 09/2012 See
(18)
R 02/2013 See
(19)
S 08/2013 See
(20)
(1) Initial release
(2) SWCS046A: Updated register tables VMMC_REG and VDAC_REG. Added register table VPLL_REG
(3) SWCS046B: Update Absolute Maximum Ratings, Recommended Operating Conditions, I/O Pullup and Pulldown Characteristics, DigitaL
I/Os Voltage Electrical Characteristics, Power Consumption, Power References and Thresholds, Thermal Monitoring and Shutdown, 32-
kHz RTC Clock, VRTC LDO, VIO SMPS, VDD1 SMPS, VDD2 SMPS, VDD3 SMPS, Switch-On/-Off Sequences and Timing
(4) SWCS046C: Associate parts; no change.
(5) SWCS046D: Update Recommended Operating Conditions - Backup Battery, I/O Pullup and Pulldown Characteristics, Backup Battery
Charger. Update Rated output current, PMOS current limit (High-Side), NMOS current limit (Low-Side), and Conversion Efficiency for
VIO SMPS, VDD1/VDD2/VDD3 SMPS and VDIG1/VDIG2 LDO. Update Input Voltage for VIO/VDD1/VDD2 SMPS. Update DC and
Transient Load and Line Regulatio and Internal Resistance for VDIG1/VDIG2 LDO, VAUX33/VMMC LDO, VAUX1,VAUX2, LDO, and
VDAC/VPLL LDO. Update DC Load Regulation for VAUX3/VMMC/VDAC. Update Power Control Timing. Add Device SLEEP State
Control. Add SMPS Switching Synchronization. Update VIO_REG, VDD1_REG, and VDD2_REG.
(6) SWCS046E: Manually added Thermal Pad Mechanical Data.
(7) SWCS046F: UpdateTable 1, SUPPORTED PROCESSORS AND CORRESPONDING PART NUMBERS.
(8) SWCS046G: Update PACKAGE DESCRIPTION, RECOMMENDED OPERATING CONDITIONS, DIGITAL I/O VOLTAGE ELECTRICAL
CHARACTERISTICS, and PWRON.
(9) SWCS046H: Update Table 40, PUADEN_REG, Table 72, RESERVED, and Table 73, RESERVED.
(10) SWCS046I: Update DC Output voltage V
OUT
in VAUX1 AND VAUX2 LDO.
(11) SWCS046J: UpdateTable 1, SUPPORTED PROCESSORS AND CORRESPONDING PART NUMBERS.
(12) SWCS046K: UpdateTable 1, SUPPORTED PROCESSORS AND CORRESPONDING PART NUMBERS - Add AM335x.
(13) SWCS046L: Update Table 1, SUPPORTED PROCESSORS AND CORRESPONDING PART NUMBERS - Add AM335x with DDR2 and
AM335x with DDR3.
(14) SWCS046M: Update STATE-MACHINE, - Update Device Sleep enable conditions control information.
(15) SWCS046N:
(a) VIO SMPS - Update PMOS current limit (high side) conditions
(b) Table 74 - Update INT_STS_REG register - VMBHI_IT description
(c) Update Input voltage: VDIG1 AND VDIG2 LDO
(16) SWCS046O: Update Table 6, Power Control Timing Characteristics
(a) Replace unit of µs for t
dbPWRONF
by ms
(17) SWCS046P: Update Table 1, SUPPORTED PROCESSORS AND CORRESPONDING PART NUMBERS -
(a) Add AM335x with DDR3 - TPS65910A31A1RSL
(b) Add Rockchip - RK30xx
(18) SWCS046Q: Update Table 1, SUPPORTED PROCESSORS AND CORRESPONDING PART NUMBERS -
(a) Refer to SWCU093 document: Update document reference from TBD to SWCU093
(19) SWCS046R: Update VRTC LDO, VRTC LDO - Changed Input Voltage - Back-up mode - Max from 3V to 5.5V.
(20) SWCS046S: Update VAUX1 AND VAUX2 LDO, VAUX1 AND VAUX2 LDO - Changed VAUX2 - Rated Output Current I
OUTmax
- On
mode from 150 mA to 300 mA
86 Submit Documentation Feedback Copyright © 2010–2013, Texas Instruments Incorporated
Product Folder Links: TPS65910 TPS65910A TPS65910A3 TPS659101 TPS659102 TPS659103 TPS659104
TPS659105 TPS659106 TPS659107 TPS659108 TPS659109