Datasheet

TPS65910, TPS65910A, TPS65910A3, TPS659101, TPS659102, TPS659103
TPS659104, TPS659105, TPS659106, TPS659107, TPS659108, TPS659109
www.ti.com SWCS046T –MARCH 2010–REVISED SEPTEMBER 2013
I/O PULLUP AND PULLDOWN CHARACTERISTICS
over operating free-air temperature range (unless otherwise noted)
(1)
PARAMETER TEST CONDITIONS MIN TYP MAX UNIT
SDA_SDI, SCL_SCK, SDASR_EN2,
SCLSR_EN1 Programmable pullup (DFT, default Grounded, VDDIO = 1.8 V –45% 8 +45% kΩ
inactive)
SLEEP programmable pulldown (default active) @ 1.8 V, VRTC = 1.8 V 2 4.5 10 µA
@ 1.8 V, VRTC = 1.8 V, VCC7 = 2.7
2 4.5 10
V
PWRHOLD programmable pulldown (default
µA
active)
@ 5.5 V, VRTC = 1.8 V, VCC7 = 5.5
7 14 30
V
BOOT0, BOOT1 programmable pulldown (default
@ 1.8 V, VRTC = 1.8 V 2 4.5 10 µA
active)
NRESPWRON pulldown @ 1.8 V, VCC7 = 5.5 V, OFF state 2 4.5 10 µA
32KCLKOUT pulldown (disabled in Active-sleep
@ 1.8 V, VRTC = 1.8 V, OFF state 2 4.5 10 µA
state)
PWRON programmable pullup (default active) Grounded, VCC7 = 5.5 V –40 –31 –15 µA
GPIO_CKSYNC programmable pullup (default
Grounded, VRTC = 1.8 V –27 –18 –9 µA
active)
(1) The internal pullups on the CTL-I
2
C and SR-I
2
C balls are used for test purposes or when the SR-I
2
C interface is not used. Discrete
pullups to the VIO supply must be mounted on the board in order to use the I
2
C interfaces. The internal I
2
C pullups must not be used for
functional applications
Copyright © 2010–2013, Texas Instruments Incorporated Submit Documentation Feedback 7
Product Folder Links: TPS65910 TPS65910A TPS65910A3 TPS659101 TPS659102 TPS659103 TPS659104
TPS659105 TPS659106 TPS659107 TPS659108 TPS659109