Datasheet

TPS65820 INTERNAL REGISTER MAP
TPS65820
SLVS663B – MAY 2006 – REVISED APRIL 2008 .............................................................................................................................................................. www.ti.com
hex NAME DESCRIPTION ADDITIONAL
DETAILS
0 RESERVED_01 RESERVED FACTORY ONLY
1 RESERVED_02 RESERVED FACTORY ONLY
2 PGOOD Output voltage status for linear regulators and dc/dc buck converters
3 INTMASK1 Interrupt request masking settings
4 INTMASK2 Interrupt request masking settings
5 INT_ACK1 Masked interrupt request register, latched
6 INT_ACK2 Masked interrupt request register, latched
7 PGOODFAULT_MASK System reset masking settings
8 SOFT_RESET Generates a software reset
9 CHG_CONFIG Battery charger configuration
A CHG_STAT Battery charger status
B EN_LDO Linear regulator ON/OFF control
C LDO12 LDO1 and LDO2 output voltage setting
D LDO3 LDO3 output voltage settings
E LDO4 LDO4 output voltage settings
F LDO5 LDO5 output voltage settings
10 SM1_SET1 SM1 buck converter ON/OFF control and output voltage setting, normal mode
11 SM1_SET2 SM1 buck converter configuration
12 SM1_STANDBY SM1 buck converter standby mode ON/OFF and standby output voltage setting
13 SM2_SET1 SM2 buck converter ON/OFF control and output voltage setting, normal mode
14 SM2_SET2 SM2 buck converter configuration
15 SM2_STANDBY SM2 buck converter standby mode ON/OFF and standby output voltage setting
16 SM3_SET SM3 white LED driver ON/OFF control and settings
17 RGB_FLASH Overall RGB driver timing settings
18 RGB_RED RGB driver: RED duty cycle and output current setting
19 RGB_GREEN RGB driver: GREEN duty cycle and output current setting
1A RGB_BLUE RGB driver: BLUE duty cycle and output current setting
1B GPIO12 GPIO1 and GPIO2 configuration
1C GPIO3 GPIO2 and GPIO3 configuration, battery charge voltage selection
1D PWM PWM output configuration
1E ADC_SET ADC ON/OFF control, ADC configuration
1F ADC reading_hi ADC data output
20 ADC reading_lo ADC data output
21 DHILIM1 ADC maximum threshold setting
22 DHILIM2 ADC maximum threshold setting
23 DLOLIM1 ADC minimum threshold setting
24 DLOLIM2 ADC minimum threshold setting
25 ADC_DELAY ADC configuration: conversion delay
26 ADC_WAIT ADC configuration: wait and repeat operation
27 LED_PWM LED_PWM configuration
2E RESERVED_03 RESERVED FACTORY ONLY
30 Submit Documentation Feedback Copyright © 2006 – 2008, Texas Instruments Incorporated
Product Folder Link(s): TPS65820