Datasheet

TPS65735
www.ti.com SLVSAI6–JUNE 2011
2.6 System Operation
The system must complete the power up routine before it enters normal operating mode. The specific
system operation depends on the setting defined by the state of the SW_SEL pin. The details of the
system operation for each configuration of the SW_SEL pin are contained in this section.
2.6.1 System Power Up
Figure 2-1. System Power Up State Diagram
Copyright © 2011, Texas Instruments Incorporated POWER MANAGEMENT CORE 13
Submit Documentation Feedback
Product Folder Link(s): TPS65735