Datasheet

www.ti.com

Setup

Figure 6. GPIO View

The INTERRUPT control window allows the user to configure and mask interrupts.

In the default setup, all interrupts are masked.

If an event is masked, it is ignored and no interrupt is generated. If an event is not masked, an interrupt is

generated based on that event.

If any interrupt is pending, the INT pin is driven low. In the lower right corner of the window, all

INTERRUPT-related User Registers are displayed.

See the TPS65720 data sheet for detailed description on these registers.

SLVU324–March 2010 TPS65720EVM

Submit Documentation Feedback