Datasheet

Test Procedure

www.ti.com

Figure 2. 10 Pins of USB2ANY Indication

Table 4. J4 10-PIN Connection of USB2ANY

TERMINAL

DESCRIPTION

NAME NO.

P4.1/GPIO0/I2C(SDA) 1 General-purpose digital I/O, I2C Data

P4.2/GPIO1/I2C(SCL) 2 General-purpose digital I/O, I2C Clock

P4.0/GPIO2/SPI(SCLK)/Easy Scale (DOUT) 3 General-purpose digital I/O, SPI Serial Clock, EasyScale DOUT

P2.4/GPIO3/PWM3/INT0 4 General-purpose digital I/O with port Interrupt, PWM up to 12 MHz

GND 5 Common Ground

Provides a +3.3V output power supply at up to 100 mA. Switched,

+3.3_EXT 6

Limited, and Monitored

General-purpose digital I/O, SPI Slave In Master Out, UART

P4.4/GPIO4/SPI(MOSI)/UART(TXD) 7

Transmit

General-purpose digital I/O, SPI Slave Out Master In, UART

P4.5/GPIO5/SPI(MISO)/UART(RXD) 8

Receive

P2.0/GPIO6/SPI(CS)/PWM1/INT1 9 General-purpose digital I/O with port Interrupt, PWM up to 12 MHz

P1.2/GPIO7/PWM0/INT2 10 General-purpose digital I/O with port Interrupt, PWM up to 12 MHz

2.1.5 Software

Download the GUI and proper driver from the TI website: http://www.ti.com/product/tps65290 Refer to the

name as: PC-Software_v1.14.0.3.zip. In order to operate the USB2ANY interface adapter, the following

items are required:

• An assembled and programmed USB2ANY interface module

• Computer with Microsoft

XP SP2 (minimum) or Windows 7 operating system with .NET 2.0 frame

work and available USB port

• Software zip: PC-Software_v1.14.0.3.zip

• Type-A to Mini-B (5-pin) USB cable (Included in an EVM kit)

Low IDDQ PMIC for Battery Energy Harvesting Applications SLVU906–April 2013

Submit Documentation Feedback