Datasheet

TPS65217A, TPS65217B, TPS65217C, TPS65217D

SLVSB64F –NOVEMBER 2011–REVISED APRIL 2013

www.ti.com

INTERRUPT REGISTER (INT)

Address – 0x02h

DATA BIT D7 D6 D5 D4 D3 D2 D1 D0

FIELD NAME not used PBM ACM USBM not used PBI ACI USBI

READ/WRITE R/W R/W R/W R/W R R R R

RESET VALUE 1 0 0 0 0 0 0 0

FIELD NAME BIT DEFINITION

not used N/A

Pushbutton status change interrupt mask

PBM 0 – interrupt is issued when PB status changes

1 – no interrupt is issued when PB status changes

AC interrupt mask

ACM 0 – interrupt is issued when power to AC input is applied or removed

1 – no interrupt is issued when power to AC input is applied or removed

USB power status change interrupt mask

USBM 0 – interrupt is issued when power to USB input is applied or removed

1 – no interrupt is issued when power to USB input is applied or removed

not used N/A

Push-button status change interrupt

0 – no change in status

PBI

1 – pushbutton status change (PB_IN changed high to low or low to high)

NOTE: Status information is available in STATUS register

AC power status change interrupt

0 – no change in status

ACI

1 – AC power status change (power to AC pin has either been applied or removed)

NOTE: Status information is available in STATUS register

USB power status change interrupt

0 – no change in status

USBI

1 – USB power status change (power to USB pin has either been applied or removed)

NOTE: Status information is available in STATUS register

Product Folder Links: TPS65217A TPS65217B TPS65217C TPS65217D