Datasheet

TPS65200
SLVSA48 –APRIL 2010 www.ti.com
CHARGER CONFIG REGISTER C (CONFIG_C)
Address – 0x03h
DATA BIT D7 D6 D5 D4 D3 D2 D1 D0
FIELD NAME VS_REF OTG_PL OTG_EN TERM_EN LOW_CHG VSREG[2:0]
READ/WRITE R/W R/W R/W R/W R/W R/W R/W R/W
RESET VALUE 1 0 0 0 1 0 1 0
FIELD NAME BIT DEFINITION
VSHORT reference select
VS_REF 0 – Internal (2.1 V) reference
1 – Current source on VSHRT pin is enabled. Pin voltage is used as 0.5 x VSHORT threshold.
OTG pin polarity
OTG_PL 0 – Active low
1 – Active high
OTG pin enable
OTG_EN 0 – Pin is disabled
1 – Pin is enabled
Charge termination enable
TERM_EN 0 – Disabled
1 – Enabled
Low charge current enable bit (current equivalent for 20 mΩ shunt)
LOW_CHG 0 – Normal charge current sense voltage per register CONFIG_A
1 – 3 mV (150 mA)
Input voltage DPM regulation voltage
000 – 4.20 V
001 – 4.28 V
010 – 4.36 V
VSREG[2:0] 011 – 4.44 V
100 – 4.52 V
101 – 4.60 V
110 – 4.68 V
111 – 4.76 V
46 Submit Documentation Feedback Copyright © 2010, Texas Instruments Incorporated
Product Folder Link(s): TPS65200