Datasheet
Table Of Contents
TPS65137
www.ti.com
SLVS929A –MAY 2010–REVISED OCTOBER 2012
THERMAL INFORMATION
TPS65137
THERMAL METRIC
(1)
DSC UNITS
10
θ
JA
Junction-to-ambient thermal resistance
(2)
56.5
θ
JC(top)
Junction-to-case(top) thermal resistance
(3)
65.8
θ
JB
Junction-to-board thermal resistance
(4)
25.2
°C/W
ψ
JT
Junction-to-top characterization parameter
(5)
1.0
ψ
JB
Junction-to-board characterization parameter
(6)
17.9
θ
JC(bottom)
Junction-to-case(bottom) thermal resistance
(7)
2.5
(1) For more information about traditional and new thermal metrics, see the IC Package Thermal Metrics application report, SPRA953.
(2) The junction-to-ambient thermal resistance under natural convection is obtained in a simulation on a JEDEC-standard, high-K board, as
specified in JESD51-7, in an environment described in JESD51-2a.
(3) The junction-to-case (top) thermal resistance is obtained by simulating a cold plate test on the package top. No specific JEDEC-
standard test exists, but a close description can be found in the ANSI SEMI standard G30-88.
(4) The junction-to-board thermal resistance is obtained by simulating in an environment with a ring cold plate fixture to control the PCB
temperature, as described in JESD51-8.
(5) The junction-to-top characterization parameter, ψ
JT
, estimates the junction temperature of a device in a real system and is extracted
from the simulation data for obtaining θ
JA
, using a procedure described in JESD51-2a (sections 6 and 7).
(6) The junction-to-board characterization parameter, ψ
JB
, estimates the junction temperature of a device in a real system and is extracted
from the simulation data for obtaining θ
JA
, using a procedure described in JESD51-2a (sections 6 and 7).
(7) The junction-to-case (bottom) thermal resistance is obtained by simulating a cold plate test on the exposed (power) pad. No specific
JEDEC standard test exists, but a close description can be found in the ANSI SEMI standard G30-88.
Spacer
RECOMMENDED OPERATING CONDITIONS
(1)
MIN NOM MAX UNIT
V
IN
Input voltage range 2.3 5.5 V
T
A
Operating ambient temperature –40 +85 °C
T
J
Operating junction temperature –40 +125 °C
(1) Refer to application section for further information.
Copyright © 2010–2012, Texas Instruments Incorporated Submit Documentation Feedback 3
Product Folder Links: TPS65137