Datasheet

TPS65137
SLVS929A –MAY 2010–REVISED OCTOBER 2012 www.ti.com
This integrated circuit can be damaged by ESD. Texas Instruments recommends that all integrated circuits be handled with
appropriate precautions. Failure to observe proper handling and installation procedures can cause damage.
ESD damage can range from subtle performance degradation to complete device failure. Precision integrated circuits may be more
susceptible to damage because very small parametric changes could cause the device not to meet its published specifications.
ORDERING INFORMATION
(1) (2)
T
A
ORDERING P/N PACKAGE MARKING
–40°C to 85°C TPS65137A PTTI
(1) For the most current package and ordering information, see the
Package Option Addendum at the end of this document, or visit the
device product folder on ti.com.
(2) Contact the factory for the availability of the TPS65137 with output
voltage discharge function.
ABSOLUTE MAXIMUM RATINGS
over operating free-air temperature range (unless otherwise noted)
(1)
VALUE UNIT
MIN MAX
Input voltage range
(2)
VIN –0.3 7.0 V
CTRL, SWP, OUTP –0.3 7.0
SWP, OUTP –0.3 7.0
OUTN +0.3 –5.5
CB –0.3 7.0
CT –0.3 3.6
ESD rating HBM 2 kV
MM 200 V
CDM 500 V
Continuous total power dissipation See Thermal
Information Table
Operating junction temperature range T
J
–40 150 °C
Operating ambient temperature range T
A
–40 85 °C
Storage temperature range T
stg
–65 150 °C
(1) Stresses beyond those listed under absolute maximum ratings may cause permanent damage to the device. These are stress ratings
only, and functional operation of the device at these or any other conditions beyond those indicated under recommended operating
conditions is not implied. Exposure to absolute–maximum–rated conditions for extended periods may affect device reliability.
(2) All voltage values are with respect to network ground terminal.
2 Submit Documentation Feedback Copyright © 2010–2012, Texas Instruments Incorporated
Product Folder Links: TPS65137