Datasheet

www.ti.com

Introduction

1.3 Requirements

In order to operate this EVM properly, the related software and hardware must be connected and properly

configured. All components and connectors are installed on the EVM as shipped, except for the host

computer and the dc power supply.

The most current version of the software must be downloaded from the TI website at www.ti.com.

1.3.1 Software

To download the software that is necessary to operate the TPS6507xEVM, check the TPS6507x product

folder on the TI Web site.

1.3.2 Host Computer

A computer with an available USB port is required to operate this EVM. The TPS6507xEVM software runs

on the personal computer and communicates with the EVM via the PC USB port and the USB to GPIO

interface. The PC must meet these minimum system requirements:

• Microsoft

Windows

2000 or XP operating system

• Available USB port

• Minimum of 30 MB of free hard disk space (100 MB recommended)

• Minimum of 256 MB of RAM

1.3.3 Power Supply

A dc power supply capable of delivering 5 V at 3 A is required to operate this EVM.

1.3.4 Ordering Options

Table 1 provides the ordering information for the various EVM options.

Table 1. TPS6507xEVM Ordering Information

Output Voltage Output Voltage Output Current

Device Part DCDC1 / DCDC2 DCDC1 / DCDC2 / Supported

LDO1 / LDO2

Orderable EVM Number Number / DCDC3 DCDC3 Processor

TPS65070EVM-430 TPS65070 3.3 V 1.8 V / 1.2 V 0.6 A / 1.5 A / 1.5 A OMAP-L1x8

1.8 V / 3.3 V

1.0 V / 1.2 V

TPS65072EVM-430 TPS65072 1.8 V / 1.2 V 1.2 V / 1.2 V 0.6 A / 0.6 A / 0.6 A Atlas IV

TPS65073EVM-430 TPS65073 1.8 V 1.8 V / 1.8 V 0.6 A / 0.6 A / 1.5 A OMAP35xx

1.2 V / 1.8 V

1.2 V / 1.35 V

TPS650731EVM-430 TPS650731 1.8 V 1.8 V / 1.8 V 0.6 A / 0.6 A / 1.5 A OMAP35xx

1.2 V / 1.8 V

1.2 V / 1.35 V

TPS650732EVM-430 TPS650732 1.8 V 1.8 V / 1.8 V 0.6 A / 0.6 A / 1.5 A OMAP3505

1.8 V / 3.3 V

1.2 V / 1.35 V

SLVU291B–April 2010–Revised September 2011 TPS6507xEVM

Submit Documentation Feedback