Datasheet

J11

J3J2

J10

J13

TPS6507xEVM-430

Oscilloscope

DCVoltmeter

DCDC3

DCDC1 DCDC2

LDO1

LDO2

TS +-

USB

Lithium-Ion

Battery

PowerSupply

USBtoGPIOInterface

Setup

www.ti.com

5 Setup

CAUTION

Many of the components on the TPS6507xEVM-430 are susceptible to damage

by electrostatic discharge (ESD). Customers are advised to observe proper

ESD handling precautions when unpacking and handling the EVM, including

the use of a grounded wrist strap, bootstraps, or mats at an approved ESD

workstation. An electrostatic smock and safety glasses should also be worn.

5.1 Software Setup

To download the software required to operate the TPS6507xEVM, check the TPS6507x product folder on

the TI web site (www.ti.com).

Download the software and execute it; follow the on-screen instructions to complete the installation.

5.2 Hardware Setup

Figure 3 shows a typical hardware test configuration.

Figure 3. TPS6507xEVM Hardware Connection

5.3 Running the Software

Click on the TPS6507x software icon to start the software. If no icon appears on the host computer

desktop, use the Start button in the lower left corner of the screen to browse the program folders to find

the installed software. The default directory for the software installation is Program Files\Texas

Instruments\TPS6507xEVM.

For details on how to use the software, refer to application note SLVA418, Using the TPS6507x Software.

TPS6507xEVM SLVU291B–April 2010–Revised September 2011

Submit Documentation Feedback