Datasheet

TPS65070, TPS65072, TPS65073

TPS650731, TPS650732, TPS650701, TPS650702, TPS650721

www.ti.com

SLVS950G –JULY 2009–REVISED MAY 2013

CHGCONFIG0. Register Address: 03h

CHGCONFIG0 B7 B6 B5 B4 B3 B2 B1 BO

Thermal DPPM Thermal Term Chg Prechg BatTemp

Bit name and function

regulation active Suspend Current Timeout Timeout error

Default x x x x 0 x x x

Set by signal

Default value loaded by: UVLO UVLO UVLO UVLO UVLO UVLO UVLO

Read/write R R R R R R R R

Bit 7 THERMAL REGULATION:

0 = charger is in normal operation

1 = charge current is reduced due to high chip temperature

Bit 6 DPPM ACTIVE:

0 = DPPM loop is not active

1 = DPPM loop is active; charge current is reduced to support the load with the current required

Bit 5 THERMAL SUSPEND:

0 = charging is allowed

1 = charging is momentarily suspended because battery temperature is out of range

Bit 4 TERM CURRENT:

0 = charge termination current threshold has not been crossed; charging or no voltage at AC and

USB

1 = charge termination current threshold has been crossed and charging has been stopped. This

can be due to a battery reaching full capacity or to a battery removal condition

Bit 2..Bit1 CHG TIMEOUT, PRECHG TIMEOUT

0 = charging, timers did not time out

1 = one of the timers has timed out and charging has been terminated

Bit 0 BAT TEMP ERROR:

0 = battery temperature is in the allowed range for charging

1 = no temperature sensor detected

Product Folder Links: TPS65070 TPS65072 TPS65073 TPS650731 TPS650732 TPS650701 TPS650702

TPS650721