Datasheet

v
Preface
Read This First
About This Manual
This User’s Guide describes the characteristics, operation, and use of the
TPS65011EVM-049 evaluation module (EVM), which helps you evaluate
and test the various operating modes of the TPS65011. The guide includes
setup instructions for the hardware and software, a schematic diagram, a
bill of materials (BOM), and PCB layout drawings for the evaluation
module.
How to Use This Manual
This document contains the following chapters:
❏ Chapter 1 – Introduction
❏ Chapter 2 – Setup
❏ Chapter 3 – Board Layout
❏ Chapter 4 – Schematic and Bill of Materials
Related Documentation From Texas Instruments
TPS65011 Data Sheet (SLVS501)
If You Need Assistance
Please contact your local TI sales representative.
FCC Warning
This equipment is intended for use in a laboratory test environment only. It
generates, uses, and can radiate radio frequency energy and has not been
tested for compliance with the limits of computing devices pursuant to
subpart J of part 15 of FCC rules, which are designed to provide
reasonable protection against radio frequency interference. Operation of
this equipment in other environments may cause interference with radio
communications, in which case the user at his own expense will be
required to take whatever measures may be required to correct this
interference.