Datasheet

www.ti.com Board Layout, Schematic, and Bill of Materials
Table 1. Bill of Materials
Count RefDes Value Description Size Part Number MFR
1 C1 10 µ F Capacitor, Ceramic, 6.3V, X5R, 15% 0603 GRM188R60J106M Murata
1 C2 4.7 µ F Capacitor, Ceramic, 6.3V, X5R, 15% 0603 GRM188R60J475K Murata
2 J1, J2 PTC36SAAN Header, 4-pin, 100mil spacing, (36-pin strip) 0.100 inch × 4 PTC36SAAN Sullins
2 J3, J4 PTC36SAAN Header, 3-pin, 100mil spacing, (36-pin strip) 0.100 inch × 3 PTC36SAAN Sullins
1 L1 3.3 µ H Inductor, SMT, 1.3A, 150-milliohm 0.102 x 0.110 VLF3014AT- TDK
inch 3R3M1R0
1 U1 TPS62700YZF IC, 225 MHz 650mA Step Down Converter YZF-8 TPS62700YZF TI
1 — PCB 0.062" x 1.0" x HPA264 Any
1.0"
2 Shunt, 100 mil, Black 0.100 929950-00 3M
Notes: 1. These assemblies are ESD sensitive, ESD precautions shall be observed.
2. These assemblies must be clean and free from flux and all contaminants. Use of no clean flux is not acceptable.
3. These assemblies must comply with workmanship standards IPC-A-610 Class 2.
4. Ref designators marked with an asterisk ('**') cannot be substituted.
All other components can be substituted with equivalent MFG's components.
SLVU225 – June 2008 TPS62700EVM-264 9
Submit Documentation Feedback